Importing (Cisco) switch configuration to Expedition

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Importing (Cisco) switch configuration to Expedition

L6 Presenter

Hello. 

I need to migrate switch (Cisco 9500, version 17,12) to PA firewall. I tried importing config into Expedition but i didn't get any rules nor L3 interfaces. All layer 3 configuration is on VLAN interfaces, ACLs are attached to this VLAN interfaces.

 

Example:

 

interface Vlan21
ip address 10.x.y.252 255.255.255.0
ip helper-address 10.x.y.35
ip directed-broadcast 101
ip access-group USERS in
standby 21 ip 10.x.y.254
standby 21 priority 110
standby 21 preempt
standby 21 authentication md5 key-string 7 aaaa timeout 30
!

Is it possible to use Expedition for this? Would any changes in exported configuration make this work?

Any help would be greatly appreciated.

 

 

1 REPLY 1

L6 Presenter

@santonic Expedition only support layer 3 interface migration, also only support asa syntax. 

  • 489 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!