Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Can't seem to connect to Cisco ASA

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Can't seem to connect to Cisco ASA

L0 Member

Using the following Phase 1 settings:

Capture.PNG

 

I keep getting this error:

Received unencrypted notify payload (no proposal chosen) from IP x.x.x.x[500] to y.y.y.y[500], ignored...orIKE phase-1 negotiation is failed. Unable to process peer’s SA payload.

Check the IKE Crypto profile configuration to verify that the proposals on both sides have a common encryption, authentication, and DH Group proposal.

 

3 REPLIES 3

Cyber Elite
Cyber Elite

http://indeni.com/how-to-configure-ipsec-vpn-between-palo-alto-and-cisco-asa/

 

That is a pretty good guide on how to configure this correctly. I would run through that and actually verify that you have everythign configured corrrectly. 

L4 Transporter

Try using 3des instead of aes-256-cbc and make sure its the same on ASA side. I got this issue recently and when changed to 3des phase1 was up.

 

Regards,

Sharief

Regards,
Sharief

3des is horribly insecure, I would not recommend it. 

  • 3471 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!