Changing an appliance management IP on a Panorama managed appliance

cancel
Showing results for 
Search instead for 
Did you mean: 

Changing an appliance management IP on a Panorama managed appliance

L0 Member

Hello,

 

I have to reconfigure management IPs on PAN-OS 8.1.x firewalls, which is managed also by a Panorama 8.1.x server. My thinking re process is as follows:

 

Add new policy to allow Panorama to new Mgt IP on applicable firewalls and vice versa.

Reconfigure management IPs on firewalls (locally)

Reconfigure Panorama device groups etc with new management IPs of firewalls.

 

Are there any gotchas or steps I should ensure as the firewalls are out in Australia and the Panorama server is in the UK so want to make this as smooth as possible?

 

Many thanks in advance.

 

 

1 REPLY 1

L4 Transporter

If you change the management address on a PA, it will update Panorama with the new info automatically. I had to do this recently and it took a couple of minutes for the new addresses to appear in Panorama.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!