Cisco ASA and Palo Alto 820 with multiple Proxy-ID

Announcements

Changes to the LIVEcommunity experience are coming soon... Here's what you need to know.

Reply
LCMember2099
L1 Bithead

Cisco ASA and Palo Alto 820 with multiple Proxy-ID

Trying to replace a site to site VPN Cisco ASA firewall with Palo Alto PA-850.  Cisco ASA on this side has multiple ACLs configured which is equivalent to Proxy-IDs.  It is configued with IKEv1, policy based, no IKEv2.  I do not have access to the firewall on the other side.

 

I have multiple Proxy-IDs configured on the PA and matched with the existing Cisco ACLs.  Phase 1 comes up but fails on Phase 2.

 

What are the CLI commands to see what both Palo Alto and Cisco are seeing for the ProxyIDs?

 

 

OtakarKlier
Cyber Elite

Hello,

Check out this article, it might help out as is maps the different fields.

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClE6CAK

 

Regards,

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!