Connectivity to issue


Changes to the LIVEcommunity experience are coming soon... Here's what you need to know.

L0 Member

Connectivity to issue

I can't use Management interface to connect to  I am trying to use trust or untrust interface byt no success. I followed some Palo Alto configuration example but still no success. I would apprreciate your help.

L7 Applicator resolves to

Do you see any traffic towards that IP in Monitor > Logs > Traffic ?

Enterprise Architect @ Cloud Carib
L0 Member

I don't see any traffic to in monitoring.  I created management profile and trying to apply it to trust or untrust interfaces. When configuring Service Route I use customize and point to trust interface (eth1/2) ip address. This doesn't work. I tried also use untrust interface (1/1) but I don't see this interface as source interface. 



L7 Applicator

If you cannot use the management interface then you may need to also change the service route for DNS.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!