Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Error after Upgrading to 6.1.10

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Error after Upgrading to 6.1.10

L0 Member

I upgraded our Panorama and two PA3020's in a HA setup this morning. Afterwords I am getting the following errors committing from Panorama to our PA3020's.

 

  • Details:
  • . Configuration committed successfully
  • Warnings:
  • . vsys1 (vsys1)
  • . Warning: NAT DIPP rule Source-NAT-Rules: Needed translated addresses space after multplying oversubscrition ratio(2) is 508, which exceeds the per rule limitation of 256.
  • . We auto-degrade the oversubscription ratio to 1 for this rule.
  • . (Module: device)

Any help to resolve would be appriciated.

 

1 REPLY 1

Cyber Elite
Cyber Elite

Hi @stjones !

 

Could you add a screenshot of your nat rule? it appears the ip range used in 'source-nat-rules' is too large

The 'per rule' maximum allocated DIPP addresses for your platform is 256 which has an oversubscription multiplier of 2 which makes available additional ports per source address (this is a new feature in PAN-OS 6.1, see articles below). If you need to have more source addresses, the oversubscription multiplier could cause the nat pool to gow too large as the number would surpass the device limitations

 

you can either decrease the IP pool allowcated to the rule, or you can disable the multiplier, opening up more space for source IP addresses

 

> configure 
Entering configuration mode
[edit]                                                                                                                                                                                                          
# set deviceconfig setting nat dipp-oversub 1x

# commit

 

please check out these articles:

NAT Capacity Enhancements

How to Check the Oversubscription on a NAT Rule

 

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization
  • 3057 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!