how to Evaluate PA 7.0.0 on v sphere VM100

[KMallela]

Hi All,

Can some help me how  to Evaluate PA 7.0.0.

1.  I have installed VM 100 series with PA 7.0.0 on vshere environment.

2. I have PA 5050 with PA  6.0.10 in production  network.

3. How to check ACC on my VM 100 series with PA 7.0.0.

4. How traffic traps can be processed through VM.

[Raido_Rattameister]

Hi,

You probably don't want to pass traffic through VM if you only care about ACC output.

I don't know your VMware setup but basically you have to create span port on your switch, tap interface on VM100, connect them together somehow (if can't do rspan then physical patch cable between switch span port and VMware host), allow promiscuous mode on VMware portgroup), security policy to allow incoming traffic to tap port and then you can review ACC.