how to Evaluate PA 7.0.0 on v sphere VM100

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

how to Evaluate PA 7.0.0 on v sphere VM100

L2 Linker

Hi All,

Can some help me how  to Evaluate PA 7.0.0.

1.  I have installed VM 100 series with PA 7.0.0 on vshere environment.

2. I have PA 5050 with PA  6.0.10 in production  network.

3. How to check ACC on my VM 100 series with PA 7.0.0.

4. How traffic traps can be processed through VM.

1 REPLY 1

Cyber Elite
Cyber Elite

Hi,

You probably don't want to pass traffic through VM if you only care about ACC output.

I don't know your VMware setup but basically you have to create span port on your switch, tap interface on VM100, connect them together somehow (if can't do rspan then physical patch cable between switch span port and VMware host), allow promiscuous mode on VMware portgroup), security policy to allow incoming traffic to tap port and then you can review ACC.

Enterprise Architect, Security @ Cloud Carib Ltd
Palo Alto Networks certified from 2011
  • 2300 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!