how to monitor PA firewall interface IP address using SNMP monitoring

cancel
Showing results for 
Search instead for 
Did you mean: 

how to monitor PA firewall interface IP address using SNMP monitoring

L1 Bithead

Below KB don't contain OID 1.3.6.1.2.1.4.20 . I am looking for this OID (provides the addresses and the link to the interfaces you've sent through)to receive firewall interfaces IP address using snmp.

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClaSCAS

 

Please confirm if PANOS 10.0.7 or any PANOS can capable of sending IP address of the firewall interfaces just like any other object information to SNMP manager.

 

Thanks,

Shiva Vaishya

1 REPLY 1

Cyber Elite
Cyber Elite

@ShivaVaishya,

The firewall doesn't fully implement 1213, most importantly ipAddrTable for your use case. Reach out to your SE and put in a feature request to have it added. 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!