04-06-2017 06:19 PM
Trying to establish ipsec tunnel comes up and then disconnects after above msg.
Other side has roming sim in the 4g router.
What does db and act means.
I have tried enabling NAT-T on my side but didnt help.
04-07-2017 12:35 AM - edited 04-07-2017 12:46 AM
NAT-T has to be enabled from the both sides @santonic is it correct? Let the remote side to initiate a tunnel, put your Palo into the "passive" mode.
Give us a little bit more logs:
> tail lines 50 mp-log ikemgr.log
04-07-2017 01:02 AM
Yeah, NAT-T has to be configured on both sides. but this isn't the issue here (yet).
PA is telling you it can't find IKE config for that IP address (which makes sense as you' will have dynamic address when roaming).
Change config to dynamic IP for peer and passive mode like @TranceforLife suggested..
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
