ike-generic-event-remote address mismatched. db=49.224.86.11[24497], act=49.224.86.11[4173]'

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

ike-generic-event-remote address mismatched. db=49.224.86.11[24497], act=49.224.86.11[4173]'

L3 Networker

Trying to establish ipsec tunnel comes up and then disconnects after above msg.

Other side has roming sim in the 4g router.

What does db and act means.

I have tried enabling NAT-T on my side but didnt help.

2 REPLIES 2

L6 Presenter

NAT-T has to be enabled from the both sides @santonic is it correct? Let the remote side to initiate a tunnel, put your Palo into the "passive" mode. 

 

Give us a little bit more logs:

 

> tail lines 50 mp-log ikemgr.log

Yeah, NAT-T has to be configured on both sides. but this isn't the issue here (yet).

 

PA is telling you it can't find IKE config for that IP address (which makes sense as you' will have dynamic address when roaming).

Change config to dynamic IP for peer and passive mode like @TranceforLife suggested..

 

 

  • 2023 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!