Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
07-16-2024 07:18 PM
We have our PA connected to our ISP via /30's and they gave us a /28. We have a SilverPeak sdwan appliance behind the PA and are NAT'ing it's WAN interface from 10.5.1.2 to x.x.x.50. We can reach the SilverPeak on 443, but when we noticed it's not trying to establish underlay tunnels with the other SilverPeaks. I tried to manually configure an ipsec tunnel but even though I pointed the far end to x.x.x.50, the logs show it was trying to establish with our side of the /30. Any pointers would be greatly appreciated.
07-17-2024 12:07 PM
Hello,
Is your NAT a bi-directional? Also check the security policies to make sure the traffic is allowed.
Regards,
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
