Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

PA-4000 Security and NAT "add rule" configuration limit

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

PA-4000 Security and NAT "add rule" configuration limit

L1 Bithead

Is there information on Security and NAT "add rule" configuration limitations for the PA-4000 series?

1 accepted solution

Accepted Solutions

L4 Transporter

4020

Total NAT rules: 1000 (max of 200 dynamic IP/port rules)

Security rules: 10000

4050/4060

Total NAT rules: 4000 (max of 200 dynamic IP/port rules and 2000 dynamic IP rules)

Security rules: 20000

View solution in original post

6 REPLIES 6

L4 Transporter

4020

Total NAT rules: 1000 (max of 200 dynamic IP/port rules)

Security rules: 10000

4050/4060

Total NAT rules: 4000 (max of 200 dynamic IP/port rules and 2000 dynamic IP rules)

Security rules: 20000

do you know the max rules on the rest of the Policy categories i.e. SSL decryption, App Override, QOS, and Captive Portal?

Here is a CLI command you can run on a device to print out the system limits:

show system state filter cfg.general.max*

Some of the output is cryptic but hopefully the common ones are easily identifiable.

Mike

Hi Mike,

I have some questions.

1/ Is the number of dynamic ip/port rules limited to 200 on 2.1.x too?

2/ Why is the limit defined?

3/ Will does the number of dynamic-ip/port rules increase?

>4020

>Total NAT rules: 1000 (max of 200 dynamic IP/port rules)

>Security rules: 10000

>

>4050/4060

>Total NAT rules: 4000 (max of 200 dynamic IP/port rules and 2000 dynamic IP rules)

>Security rules: 20000

Regards,

Tomoyuki Komure

1. Not sure. The same command mentioned earlier should allow you to check that.

2. Each rule consumes resources.

3. We are considering increasing this limit in future releases.

Hi Mike,

I have a same scenario with the 5000 platform.

Can you please give me the details for the limitations:

Error: Number of dynamic-ip-and-port rules (401) exceeds vsys capacity (400)

I see the command above gives us a general perception of max limitations on box.

For NAT this is what I see,

cfg.general.max-nat-policy-rule

Thanks

Samshodh

  • 1 accepted solution
  • 3420 Views
  • 6 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!