Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
05-01-2019 06:21 PM
On PA5050 we have One of power uspply failed.
I have opened RMA with PA.
I was using this command to see env logs
less mp-log ehmon.log
*
* Ehmon (v3.0)
*
2018-07-01 01:43:57.677 -0600 Start time.
2018-07-01 01:43:59.679 -0600 Loading: libkernel_error.so... done
2018-07-01 01:43:59.680 -0600 Loading: libraid.so... done
This does not show anything
How can i see env logs that shows power supply has failed?
05-01-2019 09:08 PM
@MP18 ,
Power supply alarms will also be recorded in chasd.log and the actual system log, alongside being able to see if you have a failed power supply via the 'show system environmentals' command.
05-01-2019 09:08 PM
@MP18 ,
Power supply alarms will also be recorded in chasd.log and the actual system log, alongside being able to see if you have a failed power supply via the 'show system environmentals' command.
05-02-2019 07:00 AM
So chasd.log shows all the logs of system hardware
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
