PA -5060 Version: 8.1.24 , All the interfaces flapped simlutanesouly

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PA -5060 Version: 8.1.24 , All the interfaces flapped simlutanesouly

Hi Team,

 

We have observed a situation where all the connected interfaces were flapped on the Firewall with the below logs, there is no much conclusive evidence in the tech-support logs, not sure if i am missing the log file which has the reason for this cause.

 

LACP interface ethernet1/2 moved into AE-group ae3.
LACP interface ethernet1/1 moved into AE-group ae3.
LACP interface ethernet1/23 moved into AE-group ae2.
LACP interface ethernet1/22 moved into AE-group ae1.
LACP interface ethernet1/21 moved into AE-group ae1.
LACP interface ethernet1/7 moved into AE-group ae5.
LACP interface ethernet1/6 moved into AE-group ae5.
Chassis Master Alarm: Cleared
LACP interface ethernet1/24 moved out of AE-group ae2. Selection state Unselected(Link down)
LACP interface ethernet1/23 moved out of AE-group ae2. Selection state Unselected(Link down)
LACP interface ethernet1/22 moved out of AE-group ae1. Selection state Unselected(Link down)
LACP interface ethernet1/2 moved out of AE-group ae3. Selection state Unselected(Link down)
LACP interface ethernet1/1 moved out of AE-group ae3. Selection state Unselected(Link down)
LACP interface ethernet1/21 moved out of AE-group ae1. Selection state Unselected(Link down)
LACP interface ethernet1/7 moved out of AE-group ae5. Selection state Selected
LACP interface ethernet1/6 moved out of AE-group ae5. Selection state Selected
LACP interface ethernet1/6 moved into AE-group ae5.
LACP interface ethernet1/7 moved into AE-group ae5.
LACP interface ethernet1/7 moved out of AE-group ae5. Selection state Unselected(Link down)
LACP interface ethernet1/6 moved out of AE-group ae5. Selection state Unselected(Link down)
HA Group 2: Link group 'COM_ZONE' failure; all links are down
HA Group 2: Link group 'Swift' failure; all links are down
Chassis Master Alarm: HA-event 
HA Group 2: Moved from state Active to state Non-Functional
HA Group 2: Link group 'GIFT_DMZ' failure; all links are down
LACP interface ethernet1/6 moved into AE-group ae5.
LACP interface ethernet1/7 moved into AE-group ae5.
LACP interface ethernet1/7 moved out of AE-group ae5. Selection state Selected
LACP interface ethernet1/7 moved into AE-group ae5.
LACP interface ethernet1/7 moved out of AE-group ae5. Selection state Unselected(Link down)
LACP interface ethernet1/6 moved out of AE-group ae5. Selection state Unselected(Link down)
HA Group 2: Link group 'GIFT_DMZ' failure; all links are down

 

Please advise the reason for the failures and how to mitigate.

 

As we also understand the version 8.1.24 is already EOS , but client planning to upgrade the firewalls shortly.

1 accepted solution

Accepted Solutions

L6 Presenter

Hello Virupaksha,

 

These logs are not sufficient to give any conclusion.

 

Please upload the TSF in the PANTS tool and share the PANTS link over the mail and also the complete description of the issue.

 

I will provide further information from there. 

 

Also, make sure next time you will post your query in "ASC Discussion Forum" 

 

https://live.paloaltonetworks.com/t5/asc-discussion-forum/bd-p/ASCDiscussions 

View solution in original post

3 REPLIES 3

@sawjain Any feedback on the above, as per client the connected don't have any issues during the time of the issue

L6 Presenter

Hello Virupaksha,

 

These logs are not sufficient to give any conclusion.

 

Please upload the TSF in the PANTS tool and share the PANTS link over the mail and also the complete description of the issue.

 

I will provide further information from there. 

 

Also, make sure next time you will post your query in "ASC Discussion Forum" 

 

https://live.paloaltonetworks.com/t5/asc-discussion-forum/bd-p/ASCDiscussions 

Hello Sawan,

 

Thanks for your response.

 

I will share the PANTS link over the email and the description for your feedback.

 

Also will make sure the query is posted on the ASC discussion forum from next time.

 

Meanwhile i will continue review the tech-support logs.

 

  • 1 accepted solution
  • 1610 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!