Palo Alto cant filter users in a group
cancel
Showing results for 
Search instead for 
Did you mean: 

Palo Alto cant filter users in a group

L4 Transporter

Hi,

I have a PA2050 v(4.0.11) and PAN-Agent for ldap users and groups. I have created a a group in my Active directotory and i configure a policy for this group but i try to check this policy with one user in this group and firewall dont let me passtrough.

I cant see that my user belongs to this new group but i can add this group in policies.

telindus@fw1orgt(active)> show user ip-user-mapping ip 10.1.12.70

IP address:  10.1.12.70

User:        oartg\brepr

Ident. By:   AD

Idle Timeout: 1956s

Max. TTL:    1956s

Groups that user belong to (used in policy)

Group(s):    oargt\internet

             oargt\satd

             oargt\diba

My user brepr belongs to group oargt/accessfor in the AD but i cant see it in this output. I can apply the group oargt/accessfor in policies.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

L4 Transporter

Its solved :smileyhappy:

i put these commands and now its working

debug dataplane reset user-cache all

debug device-server reset pan-agent all

THANKS A LOT

View solution in original post

8 REPLIES 8

L6 Presenter

if you have a security rule for accessfor

you should also see that

try to refresh the mappings

debug user-id refresh group-mapping

i dont have that command debug user-id in my PA version 4.0.11..... how can i refresh the cache for groups or something like that?+

My user brepr belongs to satd and the group satd belong to accessfor. is this important???? can i map a group within another one?

Hi,

I missed that you use 4.0.x

with 4.0.x your agent will do both group and user mapping

for nested groups I made test with 5.0.x and it was working but did not do with 4.0.x so I am not sure

on agent do you see all groups ?

for the command

try

debug device-server refresh user-group all

I cleared the cache groups and device-server and it didnt work :smileysad:

Its very weird because i can add this group accessfor in a policy but i cant see any users in this group.

I have created the policy again.

I have restarted the pan agent service

I have cleared all caches users/groups

What more can i try??

try to create another new group at the same place and make a user member of it.Than refresh groups again.After look if anything changes for that user for new group ?

L4 Transporter

Its solved :smileyhappy:

i put these commands and now its working

debug dataplane reset user-cache all

debug device-server reset pan-agent all

THANKS A LOT

View solution in original post

i think the command whick solved was debug device-server reset pan-agent all

thanks a lot

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!