PPS Report

cancel
Showing results for 
Search instead for 
Did you mean: 

PPS Report

L2 Linker

Has anyone built a custom report to get packets per second for a destination?

I see we can get total packets transmitted/received over a given period of time, but nothing for calculating pps right in the report.

 

Any suggestions?


Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions

I really think what Amy is looking for would be coming from netflow data.  I agree it would be nice to potentially have it in the firewall, but if you are sending your netflow data from the FW to something injesting netflow that should be exactly what you need.

 

packets per second : specific IP destination. 

View solution in original post

4 REPLIES 4

Cyber Elite
Cyber Elite

Reports cannot be created using that type of data, they are based on traffic or threat logs that gather session based information. Performance based information can be extracted via SNMP and an external tool would be able to generate performance reports (like cacti)

Tom Piens
PANgurus

I really think what Amy is looking for would be coming from netflow data.  I agree it would be nice to potentially have it in the firewall, but if you are sending your netflow data from the FW to something injesting netflow that should be exactly what you need.

 

packets per second : specific IP destination. 

View solution in original post

Though it's not from a Palo UI.  Here's what a "netflow" type report could potentially look like:

 

Netflow.JPG

L2 Linker

Thank you all for the replies!

I setup a RO type login in Panorama for upper management to view reports and stats, and wanted to present PPS in a report there as well.

I do have Netflow data being collected via another tool, but was hoping to do it all in one.

 

Thanks again for the info, everyone!

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!