Problem routing traffic from ipsec tunnel to ipsec tunnel

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Problem routing traffic from ipsec tunnel to ipsec tunnel

L0 Member

We have two PA820 boxes PA#1 & #2, both are connected via IPSec and the traffic flows without any problem
We have a TMG server to which PA#2 is connected via IPSec and traffic flows without any problem
Now we want PA#1 to be talking to TMG server via PA#2

ON PA#1 we can see that the traffic is going through the tunnel, but it is not being detected in the logs on PA#2

What needs to be done inorder to PA#1 to get connected to TMG via PA#2 ?

1 REPLY 1

L7 Applicator

Hi @schufindia

 

Do you use a route based VPN between PA#2 and the TMG? And if not do you NAT the connections coming from PA#1 which should be routed to the TMG or did you make sure that the proxy IDs are configured properly for the traffic from PA#1?

  • 1240 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!