09-05-2017 11:04 AM - edited 09-06-2017 05:11 AM
I just had a very bad experience with pan-os 7.1.12 on a vm-100 HA cluster.
After installing 7.1.12 (upgrade from 7.1.11) on the passive node interface 1/1 passes no traffic when when i make the upgraded node "active"
The network icon on the network tab shows red and no traffic is flowing on that interface, other interfaces function normal.
In the monitoring tab section system everything seems normal: is shows: 'Port ethernet1/1: Up 10Gb/s-full duplex' just like the other ports.
This are exact the same symptoms as the guest nic is disconnected in vsphere but that was not the case.
I tried rebooting/shutting down etc the PA-vm-100 but without any result.
After rolling back to 7.1.11 interface 1/1 started working again immediately
So be aware!
09-06-2017 01:12 AM
Hi @Gertjan-HFG
Have you been in contact with support and has this been confirmed?
09-06-2017 05:12 AM - edited 09-06-2017 05:13 AM
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
