05-15-2023 12:12 PM
I would like to take the 8 gig drives from a retiring M200 appliance, format, and install them in a M600 appliance in the expansion bays for additional storage. Is there a procedure available to 1. Format the drives on the M200, 2. Install in the M600, and 3. Add them to the existing storage as expanded space.
05-17-2023 08:40 AM
you can format log drives in maintenance mode. this is sometimes needed to get your logs to work again in Panorama.
but you don't have to do that.
if you just insert the drives from the M200 into the M600 you can just add the drives. it will prompt you to say the drives have already been used. I think you have to add "force" to the end of the normal drive add command.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!