One log collector can connect with two Panorama Mangement?

[atrachu]

WE have plan to migrate M100 ( Management Only mode ) to M200 ( Management Only mode ).

Old system have 2 appliance

        M100 ( Management Only mode ) connect to M500 (Log Collector mode)

Can I connect M100 and M200 to same M500 (Log Collector mode)?

please advice

Thank you

Anupong T.

[PavelK]

Thank you for the post @atrachu

I do not believe this is possible. The dedicated log collector's Panorama registration is configured directly on log collector (Step No.8) in below link:

https://docs.paloaltonetworks.com/panorama/10-1/panorama-admin/set-up-panorama/set-up-the-panorama-v...

With below configuration: <IPaddress1> is Panorama manager and <IPaddress2> is for the case Panorama manager is in HA pair, where you would configure standby IP address.

set deviceconfig system panorama-server <IPaddress1> panorama-server-2 <IPaddress2> 

I do not see any option nor a way for a log collector to be registered to 2 Panorama managers.

I am currently preparing for the same migration to swap M-100 with M-200. As of now, I am planning to migrate log collectors to M-200 and completely retire M-100.

Kind Regards

Pavel