policy based Ikev2 site to site VPN between Cisco router and Palo Alto

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

policy based Ikev2 site to site VPN between Cisco router and Palo Alto

L1 Bithead

we have a policy-based site-to-site VPN between cisco router and palo alto. But the tunnel goes down and doesn't come up after the IPsec lifetime is expired. And tunnel only comes up after sending traffic from cisco to palo alto and not the other way. When The devices under the Cisco LAN subnet(192.168.2.0/24) try to communicate with the server (under the PA LAN subnet, 10.1.1.0/24), the tunnel doesn't come up. DPD and lifetime are already configured on both the Cisco router and PA

1 REPLY 1

Cyber Elite
Cyber Elite

Hello,

Setup a tunnel monitor, it should send a ping across the tunnel and see if its up, etc. This should keep the tunnel up/alive.

 

Regards,

  • 798 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!