cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Who rated this article

L7 Applicator
100% helpful (2/2)

There are many ways to replace Zones in your Rules but there is one that really makes a difference.

 

The idea in this example is replace the Zone called VPN-Didac by Untrust. So the approach we will take is filter by the Zone and see where this zone is used and then do the replace.

 

From within the Project navigate to Network and then click on Zones.

 

 

vpndidac.jpg

 

 

From there right-click on the Zone (point he mouse over the name) we want to replace, in our case VPN-Didac and select Add to filter.

 

vpndidac2.jpg

This will create a new filter and we need to activate it by using drag and drop to drop it under ACTIVE folder and click on APPLY FILTER button.

 

didac3.jpg

 

 

Navigate to TOOLS and Search and Replace. Select from the left panel where the output from the filters are listed the Zone we want to replace and then Expedition will search in what groups or policies has been used.

 

didac4.jpg

 

In our example we will click on Security Policies and we will select all the rules where this zone was seen and we will add to Replace, the same will do with the Nat Policies shown as well. After that we will click on REPLACE.

 

From the REPLACE view and keeping all the elements selected choose from the combo called Replace by "Zones" and then from the next combo called "To" select the zone you want to be replaced by the one you searched.

 

didac5.jpg

 

Click on Replace All and check from the Rules the change was effectively done.

 

didac6.jpg

 

 

Done !

 

Rate this article:
(1)
Who rated this article