Page 92 have a better description: IPv4 Tab PPPoE Choose PPPoE if the interface will be used for PPPoE and configure the following settings: General subtab: • Enable—Select the check box to activate the interface for PPPoE termination. • Username—Enter the user name for the point-to-point connection. • Password/Confirm Password—Enter and then confirm the password for the user name. Advanced subtab: • Authentication—Choose CHAP (Challenge-Handshake Authentication Pro- tocol), PAP (Password Authentication Protocol), or the default Auto (to have the firewall determine the authentication protocol for PPPoE communications). • Static Address—Specify the static IP address that was assigned by the service provider (optional, no default). • Automatically create default route pointing to peer—Select the check box to automatically create a default route that points to the PPPoE peer when con- nected. • Default Route Metric—Specify the route metric to be associated with the default route and used for path selection (optional, range 1-65535). • Access Concentrator—Specify the name of the access concentrator to which the connection is made (optional, no default). • Service—Specify the service string (optional, no default). • Passive—Select the check box to use passive mode. In passive mode, a PPPoE end point waits for the access concentrator to send the first frame.
... View more
