Timeout for some connections using GWLB

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Timeout for some connections using GWLB

L0 Member

Hi All

Has anyone else had a play with the GWLB on AWS?

 

I've here a topology hub and spoke base on this link:

https://aws.amazon.com/pt/blogs/networking-and-content-delivery/centralized-inspection-architecture-...

 

But, some lambdas in the spoke are with timeout to connect to Internet. The firewalls are available one each Availability Zone and are the same routes for the IGW. I've the follow scenario:

US Virginia:
Lambda Spoke - Availability Zone F - The default route table 0.0.0.0/ to TGW Attachment. 
TGW Attachment via Spoke Route Table 
Spoke Route Table has a default route 0.0.0.0 to VPC with the security appliances 
TGW Attachment on the VPC Security available on the AZ1 e AZB has default route to VPC endpoint GWLB.
This endpoint GWLB was created on the same private subnet of Firewall.
Packets arrives to Firewall and we have a source nat to public interface and route to IGW.

 

It's work, but sometimes we've timeout on the sessions with the spokes to Internet. 

 

0 REPLIES 0
  • 1956 Views
  • 0 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!