EPM - Recommended Practice - Mutual Security Software Exclusions/DFSR

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Endpoint Privilege Manager (EPM) Articles
5 min read
L2 Linker
No ratings
Are their any recommendations for integrating Endpoint Privilege Manager (EPM) / Viewfinity , side-by-side with other security software?

Steps

We recommend implementing mutual exclusions for both. This means adding exclusions to EPM so it doesn't monitor the "other" security software and adding exclusions to the "other" security software so it doesn't monitor EPM's process, folders, drivers, resources.
The below information is also available in the EPM online documentation at:

https://docs.cyberark.com/Product-Doc/OnlineHelp/EPM/Latest/en/Content/Installation/InstallAgentsOnE...
 
How to exclude "other" software from EPM?
1. From the manager UI vfmain page proceed to: 
a. SaaS - Advanced > Agent Configuration > General Configuration > Agent Behavior > Exclude files from policies
b. OnPrem - Advanced > Agent Configuration > Files To Be Ignored > Add

2. Input the Location and/or specific files of the third party software and/or relevant user/groups. (Tip - in the 'File' column wildcards can be used, for example *.js will exclude all javascript filetypes in the defined location, while still monitoring other filetypes)
3. Repeat for all locations/file types of the product.
4. Repeat for all products
5. "Save" the Agent Configuration changes. This will trigger a new policy to be propagated to the endpoints containing the new exclusion rules.
6. For driver level exclusions, a reboot of the endpoint may be required to take effect.
 
How to exclude EPM from "other" security Software?
This question depends on the "other" software. Some will allow you to simply exclude a folder (EPM's exclusions for example support this), but others require that each file be distinctly targeted. 
We don't support third-party products so we don't have information on exactly how to do this on their side. 
 
 
For Windows machines, we can say that for EPM Endpoints - all files are located in the following directories or locations
- C:\Program Files\CyberArk\Endpoint Privilege Manager\Agent (the full directory)
- C:\Program Files (x86)\CyberArk\Endpoint Privilege Manager (the full directory)
- C:\Windows\System32\drivers\vfdrv.sys 
- C:\Windows\System32\drivers\vfnet.sys 
- C:\Windows\System32\drivers\vfpd.sys 
- C:\Windows\System32\drivers\CybKernelTracker.sys
 
For macOS machines, EPM Agent files are located in the following locations:
For Mac Agents 11.4 and previous, these are the exclusions:
- /Library/Application Support/CyberArk/
- /Library/Security/SecurityAgentPlugins/CyberArkEPMSecurityAgentPlugin.bundle/
- /Library/Extensions/CyberArkEPM.kext/
- /private/etc/sudoers.d/CyberArkEPM

- /usr/local/lib/pam/CyberArkEPMPAM.dylib

For Mac Agent 11.5 and later, these are the exclusions:
-/Applications/Idira EPM.app
-/Library/Application Support/CyberArk

 
Note:
The endpoint computer will probably require a reboot after the new exclusions have been configured for the third-party security programs.


Excluding DFSR 
 

The Distributed File System Replication (DFSR) service is a new multi-master replication engine that is used to keep folders synchronized on multiple servers. Replicating data to multiple servers increases data availability and gives users in remote sites fast, reliable access to files.

EPM can interfere with this activity, causing excessive resource consumption or preventing DFSR from operating. For example, in the following external post:

http://www.kuskaya.info/2021/09/11/how-to-troubleshoot-dfsr-event-id-4412-storm/

The solution is to exclude from EPM inspection %SYSTEMDRIVE%\System Volume Information or specifically \DFSR subfolder.

  Q. Are their any recommendations for integrating Endpoint Privilege Manager (EPM) / Viewfinity , side-by-side with other security software?
 
A. We recommend implementing mutual exclusions for both. This means adding exclusions to EPM so it doesn't monitor the "other" security software and adding exclusions to the "other" security software so it doesn't monitor EPM's process, folders, drivers, resources.
The below information is also available in the EPM online documentation at:
 
How to exclude "other" software from EPM?
1. From the manager UI vfmain page proceed to 
2. Advanced > Agent Configuration > Files To Be Ignored > Add
3. Input the Location and/or specific files of the third party software and/or relevant user/groups. (Tip - in the 'File' column wildcards can be used, for example *.js will exclude all javascript filetypes in the defined location, while still monitoring other filetypes)
4. Repeat for all locations/file types of the product.
5. Repeat for all products
6. "Save" the Agent Configuration changes. This will trigger a new policy to be propagated to the endpoints containing the new exclusion rules.
7. For driver level exclusions, a reboot of the endpoint may be required to take effect.
 
How to exclude EPM from "other" security Software?
This question depends on the "other" software. Some will allow you to simply exclude a folder (EPM's exclusions for example support this), but others require that each file be distinctly targeted. 
We don't support third-party products so we don't have information on exactly how to do this on their side. 
 
 
For Windows machines, we can say that for EPM Endpoints - all files are located in the following directories or locations
- C:\Program Files\CyberArk\Endpoint Privilege Manager\Agent (the full directory)
- C:\Program Files (x86)\CyberArk\Endpoint Privilege Manager (the full directory)
- C:\Windows\System32\drivers\vfdrv.sys 
- C:\Windows\System32\drivers\vfnet.sys 
- C:\Windows\System32\drivers\vfpd.sys 
- C:\Windows\System32\drivers\CybKernelTracker.sys
 
For macOS machines, EPM Agent files are located in the following locations:

For Mac Agents 11.4 and previous, these are the excluions:
- /Library/Application Support/CyberArk/
- /Library/Security/SecurityAgentPlugins/CyberArkEPMSecurityAgentPlugin.bundle/
- /Library/Extensions/CyberArkEPM.kext/
- /private/etc/sudoers.d/CyberArkEPM

- /usr/local/lib/pam/CyberArkEPMPAM.dylib


For Mac Agent 11.5 and later, these are the exclusions:

-/Applications/Idira EPM.app
-/Library/Application/Support/CyberArk

 
Note:
The endpoint computer will probably require a reboot after the new exclusions have been configured for the third-party security programs.


Excluding DFSR 
 
The Distributed File System Replication (DFSR) service is a new multi-master replication engine that is used to keep folders synchronized on multiple servers. Replicating data to multiple servers increases data availability and gives users in remote sites fast, reliable access to files.

EPM can interfere with this activity, causing excessive resource consumpution or preventing DFSR from operating. For example, in the following external post:
http://www.kuskaya.info/2021/09/11/how-to-troubleshoot-dfsr-event-id-4412-storm/

The solution is to exclude from EPM inspection %SYSTEMDRIVE%\System Volume Information or specifically \DFSR subfolder.
Rate this article:
  • 25952 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎11-05-2026 12:00 PM
Updated by: