Has anyone tried connecting Cisco SFP+ Twinax Copper Cables (sfp-h10gb-cu1m) to PA-5050 device? I've tried to find some info about it on PA KB but wasn't successful. Is there any document issued by PA listing all the supported 3rd party devices?
Following document should help you as it jots down all the SFP transceivers supported in conjunction with PAN firewalls
You can also contact your account's sales engineer to get more information on SFP+ compatibility with PAN firewalls.
Hope that helps!
Thanks and regards,
Thank you for the answer. I've checked the document but didn't find any info about Cisco parts. I guess that means they aren't officially supported. I'll contact my SE anyway just in case.
Have you ever tried to connect the Cisco SFP+ Twinax Copper Cables (SFP-H10GB-CU1M0 with PA-5050 device to see if link is brough up?
I know they are not on the PA officially supported Cables, but some Third-Party transceivers/cables may work (without warranty) and I want to know if this SPF+ DAC is one of them (if you have experience of it). Or did you finally purchased PAN compatible DAC/transcievers?
I can't remeber what model, but I have connected Cisco TwinAx to a PAN Firewall and it will work. It's not offically support and I believe it will show up as such, so if there are any problems TAC will probably point to that first.
We are using the 10G TwinAX Copper with PAN-5220 firewalls and were using them with our legacy PAN-5050 and PAN-5060 firewalls without issue.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!