Introduction
The Vault Analysis Tool (VAT) helps you assess the health of your PAM Self-Hosted or PAM SaaS environment, and if you’re preparing for or evaluating a PAM Self-Hosted Upgrade or a migration from PAM Self-Hosted to SaaS, it can help with planning.
Running this tool provides a detailed report on your vault’s operational status supporting ongoing health checks, migrations, and best-practice alignment.
This guide will instruct you on how to execute the Vault Analysis Tool Collector, and submit the collected data to Idira for report generation.
Steps
Prerequisites
Before you begin, ensure you have:
Access to the Idira (previously CyberArk) Community Portal (Advanced or Admin level)
A system with network access to the Vault on port 1858
The ability to send and receive files (for tool download and data upload)
For PAM Self-Hosted:
Vault administrator credentials (must be a Vault user, not LDAP/external)
Running the collector on a component server, such as PVWA or CPM, ensures it has the required access
For Privilege Cloud:
(Shared Services) The ability to activate and reset the password for the “installeruser”
(Standard) The credentials for your “subdomain_admin” user
Running the collector on a Privilege Cloud Connector server ensures it has the required access
Identify your PAM SaaS vault address (see the “Identifying the vault address in Idira PAM SaaS environments” section below)
Identifying the vault details in Idira PAM SaaS environments
The vault address pattern and admin user name can vary depending on your tenant type. Refer to this table to identify your vault address.
If your PAM SaaS URL matches this pattern
Tenant type
Vault address
Admin user
SUBDOMAIN.privilegecloud. cyberark.com
Privilege Cloud Standard
Your vault address is vault-SUBDOMAIN.privilegecloud.cyberark.com
Your admin user is “SUBDOMAIN_admin”
SUBDOMAIN.cyberark.cloud
Identity Security Platform
Navigate to the Setup space
Go to Customization -> Domain customization
Identify the Original URL
Should match the pattern “ORIGINALSUBDOMAIN.cyberark.cloud”
Your vault address is vault-ORIGINALSUBDOMAIN.privilegecloud.cyberark.cloud
Your admin user is
[email protected]
XXXXX is a number unique to your tenant. Navigate to Users in the Setup space, search for the installeruser to identify the exact username, and reset its password to enable it for 24 hours.
InstallerUser Documentation
Collecting Data
The first step is to run the Vault Analysis Tool Collector to collect data about your environment. Later, this will be submitted to Palo Alto Networks for analysis.
Download the Collector
Log in to your Idira Identity Security Platform tenant
Open the to the Navigate menu and go to the Setup space
Expand the Ecosystem hub section and select Marketplace
Find the Vault Analysis Tool using the filters (select Administrative Tools under the Use case filter) and/or use the search field
Download the Vault Analysis Tool Collector
Extract the downloaded ZIP file to your chosen location on an appropriate system (review the Prerequisites section as needed).
Execute the Collector
Run Collector.exe
When prompted, enter the following details:
Field
Value/Description
Privacy level*
Level 1 (No Restrictions): Obfuscate usernames.
Level 2 (Restricted): Also obfuscate safe names.
Level 3 (Highly Restricted): Also obfuscate component names.
Analyze error messages
Recommended
Customer name
Your company name
Vault address
Your vault address
SaaS environments: See “Identifying the vault address and appropriate admin user in Idira PAM SaaS environments” in the Prerequisites section of this document
Username
Vault administrator user
SaaS environments: See “Identifying the vault address and appropriate admin user in Idira PAM SaaS environments” in the Prerequisites section of this document
Password
Password for the vault administrator user
* Idira recommends privacy level 1 for most situations.
Allow the collector to run. It will:
Log in to the vault as the administrator
Create a temporary user and add it to the Auditors group
Collect and encrypt the required data
Remove the temporary user
When the collector is complete it will report “Vault scan completed successfully.”
Note the name of the output file reported by the collector. You will use it in the next step.
Submit Data for Analysis
The submission process varies depending on the purpose of the report. If you are planning or considering a migration to PAM SaaS, follow the steps in the PAM SaaS Migration Planning section. Otherwise, follow the “Health Check” section.
In addition, we are transitioning to the Palo Alto Network Customer Support Portal (CSP). If you have access to the CSP, use that process. Otherwise, scroll down to the CyberArk Community process.
You will receive a copy of the report in both cases.
PAM SaaS Migration Planning - Customer Support Portal
Log on to the Customer Support Portal (https://support.paloaltonetworks.com/).
Click on the "Create a Case" button
Click on Create an Administrative Case
Expand Idira and select PAM, Self-Hosted
In the Security Advisories question, answer No.
Select your CorePAS-Infra entitlement In Request Type and Category
For Migrations to SaaS, select Upgrades & Extensions and Migration to Privilege Cloud For PAM Self-Hosted health checks, select System Lifecycle & Maintenance and System Health Check
Fill in the requested information, which will vary depending on the selected request type, and upload the .vhc file produced by the Vault Analysis Tool Complete the remainder of the form Inform your Palo Alto Networks representative of completion of this process.
What Happens Next?
Once the file has been processed, your representative will contact you to review the results and discuss next steps.
Health Checks and Other Purposes - Customer Support Portal
Upload the Collected Data for Processing
Log on to the Idira Community Portal (https://community.cyberark.com).
Navigate to My Company Files
Upload the VA_Report-*.vhc_ file.
For File Classification, select “Log.”
In Description, enter “Vault Analysis Data.”
Notify your Idira representative when the file is uploaded
Your Idira representative will notify you when the report is available for download.
PAM SaaS Migration Planning - CyberArk Community
Submit the Data on the Migration Planning Portal
Log on to the Idira Community Portal (https://community.cyberark.com).
Navigate to the Services Hub, either by clicking on the Services Hub tile, or by using the Services Hub link at the top of the site.
In the Create Requests and Review Cases section, click on Upgrade/Migration Request.
Click on the Migration to Privilege Cloud button.
Upload the output file created by the Collector, and answer the questions in the form.
Submit the form.
What Happens Next?
Once the file has been processed, your Account Executive will contact you to review the results and discuss next steps.
Health Checks and Other Purposes - CyberArk Community
Upload the Collected Data for Processing
Log on to the Idira Community Portal (https://community.cyberark.com).
Navigate to My Company Files
Upload the VA_Report-*.vhc_ file.
For File Classification, select “Log.”
In Description, enter “Vault Analysis Data.”
Notify your Idira representative when the file is uploaded
Your Idira representative will notify you when the report is available for download.
Additional Notes
The Vault Analysis Tool supports both Self-Hosted and Privilege Cloud environments.
Scan time is typically 5–15 minutes and can vary for larger environments with many safes & accounts.
The tool provides actionable insights and prioritizes findings for remediation.