Automation rule to add IP address to EDL

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Automation rule to add IP address to EDL

L0 Member

Is it possible to create an automation script or rule to add a remote IP address to an EDL in Cortex XDR?  I'm exploring the best way to handle this.  For example, after the recent CVE-2024-3400 disclosure, I patched my firewalls, and all is good.  However, I still receive daily alerts for the 'Palo Alto Networks GlobalProtect OS Command Injection Vulnerability' attempts.  They are blocked and currently, I manually locate the IP address in the alert, right-click, and add it to the EDL.  The firewall then processes the updated EDL it in the next cycle.  I'm looking to automate this process to avoid repetitive manual tasks. If there’s a better solution, I'm open to suggestions.

1 accepted solution

Accepted Solutions

L5 Sessionator

Hi @Drew-Browning, thanks for reaching us using the Live Community.

 

There is no automated action to add the IP Address from the alerts to the EDL. Maybe adding the IP to a CSV file and then uploading it a few times per day or week can be a better solution. You can upload a file containing IPs or URLs to the EDL using the Action Center.

 

If this post answers your question, please mark it as the solution.

JM

View solution in original post

2 REPLIES 2

L5 Sessionator

Hi @Drew-Browning, thanks for reaching us using the Live Community.

 

There is no automated action to add the IP Address from the alerts to the EDL. Maybe adding the IP to a CSV file and then uploading it a few times per day or week can be a better solution. You can upload a file containing IPs or URLs to the EDL using the Action Center.

 

If this post answers your question, please mark it as the solution.

JM

L0 Member

I was afraid of that.  Thanks for your response.

  • 1 accepted solution
  • 1020 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!