How to Enable Report verdict as Incorrect Option in Cortex XDR

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to Enable Report verdict as Incorrect Option in Cortex XDR

L1 Bithead

Dear Team ,

 

We have assigned role to several XDR analyst for incident response but we cannot find Report verdict as Incorrect Option  in Key & Artifact section.

 

My doubt is how can we configure the setting in role section of XDR to enable the Report verdict option . So that Analyst can use that feature.

 

Note : We cannot provide admin privilege to the analyst.

 

 

 

 

 

 

1 accepted solution

Accepted Solutions

L4 Transporter

Hi @Venkatesh_Konar 

Additionally could you share the Role Name which has been applied to these analysts for Incident Response?

By default following Roles i.e. Privilege investigator, Investigation Admin, Viewer and Investigator could not request Wildfire Verdict Change. 
If analysts have any of these roles you will have to create a copy of these default Role and edit those role with enabling/checking the checkbox for "Request WildFire Verdict Change". Sharing screenshot for reference.

PiyushKohli_0-1689905229700.png

 

If they have appropriate role which has "Request WildFire Verdict Change" enabled under DETECTIONS & THREAT INTEL then follow the steps as shared by @nsinghvirk above.

Hope this helps!

Please mark the response as "Accept as Solution" if it answers your query.

View solution in original post

2 REPLIES 2

L4 Transporter

Hello @Venkatesh_Konar 

 

Thanks for reaching out on LiveCommunity!

 

The "Report verdict as incorrect" is available when you open the "wildfire analysis report" for a particular artefact.

nsinghvirk_0-1689872563871.png

 

nsinghvirk_1-1689872741658.png

 

Please let me know if you are talking about the same option or different one. Is the "Wildfire analysis report" button not visible to these Analysts?

L4 Transporter

Hi @Venkatesh_Konar 

Additionally could you share the Role Name which has been applied to these analysts for Incident Response?

By default following Roles i.e. Privilege investigator, Investigation Admin, Viewer and Investigator could not request Wildfire Verdict Change. 
If analysts have any of these roles you will have to create a copy of these default Role and edit those role with enabling/checking the checkbox for "Request WildFire Verdict Change". Sharing screenshot for reference.

PiyushKohli_0-1689905229700.png

 

If they have appropriate role which has "Request WildFire Verdict Change" enabled under DETECTIONS & THREAT INTEL then follow the steps as shared by @nsinghvirk above.

Hope this helps!

Please mark the response as "Accept as Solution" if it answers your query.

  • 1 accepted solution
  • 1445 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!