how to get incident xdr my endpoint only in xsoar

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

how to get incident xdr my endpoint only in xsoar

L1 Bithead

I successfully configured and integrated xdr into Xsoar

but in xsoar incidents page it gets all common incidents from XDR but i need to get only my own endpoint user incident

there is a filter option in the xdr incident to use and check your own end user, check the results, but what about xsoar?

How can i do this? Should I change the classification and mapping to use a manual filter to use my own endpoint username filter in xsoar?

or any other way to get my own endpoint incident in xosar?

Screen Shot 2022-04-25 at 10.28.19 PM.pngScreen Shot 2022-04-26 at 12.03.31 AM.png

2 REPLIES 2

L5 Sessionator

Hi @Manikandan_sam,

 

Since there is no query\filter option inside the integration. You can drop the unwanted incidents using a pre-processor. 

 

Refer - https://docs.paloaltonetworks.com/cortex/cortex-xsoar/6-6/cortex-xsoar-admin/incidents/incident-mana...

 

Thanks,

 

Jeremy.

the preprocessing rule using drop means it as a drop specific endpoint or details to drop
but how can i get a specific endpoint username incident that is only received in xsoar in the pre-process rule?

  • 1605 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!