- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.
03-21-2026 11:04 AM
Computers were listed as alive in the legacy view but not in endpoint (beta).
After switching from endpoints (beta) to endpoints, computers that are connected to the network are listed as disconnect in endpoint. urls are tls whitelisted.
03-21-2026 11:37 AM
Hi @Markus Bieri,
I’m experiencing the same issues with different endpoints and found this article: : https://community.cyberark.com/s/article/EPM---Endpoints-Beta-Connectivity-Challenges
I believe your endpoints need to meet these network requirements: https://docs.cyberark.com/epm/latest/en/content/installation/network-setup.htm
03-22-2026 05:39 PM
Recently i have the same issue, i confirm that is a connectivity issue.
This KB is helpful and also check the EPM prerequisites documentation.
Regards
03-23-2026 02:41 AM
I also face the same issue. Around 5% of agents does not show up on new console.
There are 2 solutions that usually work on my side:
Assuming your network team indicates all the instructions on the article above are in place and you are still blocked with this situation, the suggestions i gave can help.
03-23-2026 02:44 AM
Thank you very much for your answers.
We have been fullfilling this requirements since June 2024 and I already doubled check twice.
Today I have noticed, a computer is suddenly listed as alive after nearly two weeks.
03-23-2026 03:49 AM
Hi MPais
We use you this as a workaround but the problem is that the computer is not listed as a live in the console.
03-23-2026 03:56 AM
Hello @Markus Bieri
You moved endpoint from SET example: "PRD SET -> DEV SET " and on the new target set the endpoint still:
This never happened to me. On the new target SET either does not show up at all on "Endpoints (BETA)", or starts working properly.
When is showing up properly I just push it back to the original SET.
03-23-2026 04:30 AM
hello MPais
The workaround is okay.
Computer A is online (via msvpn)
Computer A is offline under endpoints (we changed from endpoints (beta) to endpoint on March 11
Since March 11 we face the problems
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

