EPM Credential Rotation

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

EPM Credential Rotation

L4 Transporter

Hello, we recently completed the EPM-PVWA integration to leverage the Credential Rotation feature. We have followed the CyberArk Documentation and we triggered a password change. However, I get the following message on the account "Automatic Management is disabled by the user" "Loosely connected device password change is pending (ImmediateTask)" we also added a recon account to the Windows Loosely Device platform. What is the next step after this? by the way the interval that we set for this was the minimum (5 hours) this time has already passed and the password rotation is in the same stage. "Automatic Management is disabled by the user" "Loosely connected device password change is pending (ImmediateTask)"

 

Thank you in advance

1 accepted solution

Accepted Solutions

You can find log:

EPM Agent : Endpoint Privilege Manager\Agent\PASAgent\Trace\PASAgentLog.txt

PVWA : IIS Logs

View solution in original post

6 REPLIES 6

L6 Presenter

When you change password manual, CPM will generated new password, and mask account to be reset (in this stage, password status=disabled by user).

When schedule is arrive (according platform policy), password will be reconcile by agent with new password was generated by cpm (in this stage= change successfully).

You did not need reconcile account for LCD.

 

L4 Transporter

Hello @Heron Sidabutar​ thank you for your response. If this stage "Automatic Management is disabled by the user" "Loosely connected device password change is pending (ImmediateTask)" doesn't change after the interval time that I set up for the policy (5 hours). Where can I start debugging the issue? where are usually the logs? and how can I confirm that the EPM Agent on my EndPoint actually tried to reach out the PVWA to grab the password?

 

and btw, I got rid of the recon acct on the platform and triggered another change.

 

Thank you in advance

You can find log:

EPM Agent : Endpoint Privilege Manager\Agent\PASAgent\Trace\PASAgentLog.txt

PVWA : IIS Logs

Thank you so much, I was able to find this in the log and I wasn't able to find anything here in the community side.

 

Field_Content_versions_oct20__0682J000009nXWJQA2.png

Have you ensured the endpoint is able to communicate with the PVWA over port 443?

L4 Transporter

Thank you so much for all your help. My test finally succeed and the EPM Agent was able to grab the new password. I encountered two error and I need to find out a way to make these changes to all the workstations and laptops. The first error that I encountered was the following:

 

“DEBUG LCDListener: (OnStart) Failed to parse retrieved time from registry. Time is corrupted or does not exist”

 

I resolved this issue by stopping and restarting the vf_agent service, following the steps on this link.

https://community.cyberark.com/s/article/EPM-LCD-Agent-cannot-save-LCD-Query-time-in-registry

 

Then, I encountered this other error:

 

“ERROR LCDHandler: (RetrieveEndpointPassword) Received web error. Error: The underlying connection was closed: An unexpected error occurred on a send.

“ERROR LCDListener: (Attach) Communication error. Probably cannot connect to the internet. Error: The underlying connection was closed: An unexpected error occurred on a send.”

 

I resolved this error, following the steps on this link:

https://community.cyberark.com/s/article/ERROR-LCDHandler-RetrieveEndpointPassword-Received-web-erro...

 

 

Now, we have a lot of workstations and laptops, my questions is.. For the first issue, is there a way that we can stop and re-start the vf_agent service on all of the workstations from the EPM Console? or is this something that we have to do manually on every workstation?

 

and for the second issue: I had to set TLS 1.2 on my test laptop in order for it to communicate with the PVWA, is there way that we can push this change via GPO to all of the workstations? or does it have to be done manually?

 

Thank you in advance!

 

 

 

  • 1 accepted solution
  • 1291 Views
  • 6 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!