Endpoint Privilege Manager (EPM) Articles
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Question 1. Why do I get an error when many targets are in a Policy Scope section? 2. I am unable to save a policy with many applications in it? How can this be solved? 3. How many file definitions can be in 1 application group? Answer 1. There is a hard limit of 1000 items that can be put into the targets section in the Policy Scope. If you are having issues with saving a policy an error will com up stating that "Invalid data was sent to the server". The action to fix this is to remove the users and groups to below 1000 items. Then the policy can be saved.  2. There is a hard limit of 1000 items that can be added into a Policy. This can be a mix of Application groups and single file definitions. If you have many items singly defined within a policy, remove them and put them into an application group. With the limit of 1000 items in a policy, it can be 1000 application groups. IMPORTANT: Please note that as a policy grows bigger with both application groups and file definitions directly in the policy, this could impact performance, such that the policy starts to not perform properly. 3. An application group has a hard limit of 1000 applications (file definitions).   
View full article
Question What is the MacOS Secure Token and what are the the Do's and Don'ts regarding this token and EPM Answer Apple File Systems (APFS) in macOS 10.13 changed the way Apple manages FileVault encryption keys. To secure and provide access to encryption keys, which are required for FileVault decryption, Apple introduced secure tokens. Secure tokens are granted to the macOS users who create a local account using Apple's Setup Assistant for the first administrative user, and then subsequently through Apple's Users & Groups pane in System Preferences. Apple's Deployment Reference for Mac describes additional methods in which a system account may be granted a secure token. Users with a secure token may enable and manage FileVault on a macOS system, and users created by these users are also given secure tokens via a chain of trust methodology. Expected Behavior: - The service account doesn’t appear on the main login window or show in the list of users in USER MANAGEMENT > Users unless FileVault is enabled for this user. - The service account appears in the list of users on the FileVault login screen on boot (when Filevault is enabled for this user. - New users will need to log in to be added to FileVault and allowed to decrypt the system. - Existing users that doesn't have secure token wont be able to update\upgrade OS. - PVWA will rotate password only if both of the users (regular logged in user & EPM user (_cyberarkepm)) have secure token enabled. - Some system settings needs EPM user to have secure token to elevate the request, such as "Users & Groups" and etc.. Dos and Don'ts: - Don't delete all your users with the secure token leaving our user as the only user with the Secure Token - Don't force password reset using sysadminctl for the last secure token enabled account. - Don't let the EPM user ( _cyberarkepm ) to be the last user with secure token enabled. - Always manage FileVault with centralized solution such as MDM & use bootstrap token to avoid crucial issues. - Do inheritance of EPM installation using IT user with secure token - Always save recovery password of FileVault. Considerations: - If the app rejects the local account password, this is likely because the admin does not have a valid secure token. If that is the case, first verify the secure token status of the admin: sysadminctl -secureTokenStatus insert_username_here. - If the secure token is disabled: The account is missing a secure token. If this is the only user account on the Mac, then the Mac is not in a state where it can provision secure tokens, and it must be wiped and macOS must be reinstalled. However, if there’s another user account on the Mac with a valid secure token, use those credentials to finish enrollment, or log in to that account and leverage the following command in Terminal to provision a secure token to the user account without a secure token: sysadminctl -adminUser admin_user_here -adminPassword ‘admin_pass’ -secureTokenOn user_here -password ‘user_pass’.  
View full article
To ensure no duplicates between the ‘Main Exclusions’ and the ‘Per Rule Exclusions’ applied on the Threat Protection, please review the list of rules and delete the duplicate values from one of the lists. Steps To View the list of the Main Exclusions: Open the console and select the desired set you want to review In the Main menu, navigate to the ‘Advanced’ tab Click on ‘Agent Configuration’ option For the ‘General configuration’, click on the 3 dots (...) and select ‘Edit parameters’ Under the ‘Policies’ section, locate the Threat protection excluded applications Click on the 3 dots (…) and select ‘Edit’ to view and modify the list. To View Per Rule Exclusions: Open the console and select the desired set you want to review In the Main menu, navigate to the ‘Policies’ tab Under the View selection dropdown, select the ‘Privileged threat protection policies’. For any Threat protection policy row with status different that ‘Off’, click on the toggle to expand it and view the active rules.  Edit each rule with the status ‘Detect’ or ‘Block, click on 3 dots (…) and select ‘Edit’ to view and modify the list of Excluded Applications.
View full article
Question When using the “Elevate unhandled applications” default policy, how does this affect events the endpoint uploads?     Answer The events will not appear as event type “Launch” "Installation” or “Elevation Request" The events will appear as event type "Trust"
View full article
The purpose of this article is to show you how to create a policy to force sudo commands to still prompt for username and password when the default policy is set to "Elevate unhandled applications" Instructions were made based on EPM Version 23.9.0.3647 Steps 1) Create a custom dialog which will be for sudo commands EPM Console > End User UI > Actions > Add Dialogs > MacOS section > Elevate Trusted Give your new dialog a name Uncheck "justification text" Uncheck "justification" Check "authorized user" Check "password" Click OK to save the dialog 2) Create an advanced policy EPM Console > Policies > Create advanced application policy > set Platform to MacOS > Set action to elevate > click continue Add definition Change definition type drop down to sudo command Next to command, change the drop down to "matches wildcard" You may notice an error in the wizard that shows "Asterisk alone cannot be used." If you do, put a space after the asterisk. Remove the other properties for "parameters" and "publisher's signature". The click done to save the definition In the End User UI section, specify the dialog you created in step #1 Add targeting to the policy as needed to test Click create
View full article
Sometimes when the EPM Agent is uninstalled some portions of the installation are not removed. There are several ways to clean up these leftover items. Here are several methods to remove these items. IMPORTANT NOTE: The out of box uninstall option from the GUI Server is expected to work and not leave behind any left over settings that would not allow a new install. If you come across such a use case , please open a case with support and provide all the technical details. If a bug is found in the uninstall process, it is important a case is filed so the problem can be escalated to R&D and the issue resolved in future versions. Steps Try the following options in the order listed. Proceed to the next option only if the previous one was unsuccessful: 1) Run the GUI uninstall 2) Generate secure token for all computers in set and run uninstall locally: msiexec /x {productcode} SECURE_TOKEN=generated_token /qn {productcode} can be found in the registry key HKLM\software\microsoft\windows\currentversion\uninstall and is unique to the product version 3) If there is no way to drop protection (fltmc output includes vfpd), then, in safe mode*, remove c:\windows\system32\drivers\vfpd.sys, reboot to normal mode and uninstall. 4) If all of the above failed : Reboot to safe mode* and run EPMUnistallCleanup.bat (located in the attached zip folder)  
View full article
Many organizations have strict control and workflow policies that must be applied to every privileged access to critical systems. One of these policies requires users to provide a reason for every privileged access to a target system. Since V10.8, customers can require users to enter a reason for connecting to a target system via PSM for Windows, enabling users to connect through PSM to any remote target securely with a standard remote desktop client application while complying with the company policies. The submitted reason is audited and can be reviewed by the audit or security teams. Steps
View full article
This video provides a short clip of how JIT can be utilized. Steps
View full article
Question If you try to add a .js script application group or policy definition, it would work, and the policy should detect it when you check the CyberArkEPM in the .js properties tab. However, adding the Publishers Signature to the policy would not work for the .js script, and the policy won't detect the script; why is this happening? Answer This is happening because "Signed By / Publishers" is only supported for PS1 Scripts, as seen in this document: https://docs.cyberark.com/Product-Doc/OnlineHelp/EPM/Latest/en/Content/EPM/Server%20User%20Guide/DefinitionProperties.htm Application types supported by "Signed By / Publishers" are: Executable (1), DLL, MSI/MSP Installation, Microsoft Update (MSU), ActiveX Control Installation, Windows App, COM object, Service, PS1 Script.
View full article
Each user on a Mac has their own "Applications" folder located in /Users/<USERNAME>/Applications. Applications inside this folder are also shown in Launchpad. The user-specific "Applications" folder contains applications that have been installed only for that particular user, as opposed to being installed for all users of the system. For example, if you download and install an application from the internet while logged in as one user, it will be installed in that user's "Applications" folder and will not be available to other users on the same Mac. It's also worth noting that some applications may require specific installation locations or may come with their own installation instructions, so it's always a good idea to check the documentation or support resources for an application before installing it. The best practice as guided by Apple and security wise, is to install 3rd party apps that are not VPN\Security\Managed by IT into the users Application folder. Once the application is installed there, the elevation request to obtain right will not be needed due to no changes in the OS which needs permissions from Finder app. URL: https://developer.apple.com/library/archive/documentation/FileManagement/Conceptual/FileSystemProgrammingGuide/FileSystemOverview/FileSystemOverview.html  
View full article
Question What are some good baseline EPM policies we can apply to our environment and how can we apply them? Answer You can review this selection of webinars for details on how to apply our baseline EPM Policies: Get To The Point Webinar : Three 20-minute on-demand virtual episodes that set you up to win in the race against ever-evolving ransomware.  You will learn why endpoint protection is important in today’s attack landscape and how to get started with Endpoint Privilege Management (EPM) today to reduce risk on day one. Attached are two sets of policies for you to import.  The .epmp file should be used for new sets The .vfp file should be used for existing sets.  Note: these will be included in a future version by default. 
View full article
How do you configure a Procdump to generate dump files from a crashing processes? Steps In process CRASH scenarios you should first register the ProcDump utility as a "Postmortem Debugger" by calling "procdump -i -ma" and then just wait for the process to crash. ProcDump will automatically generate a full dump for the crashed process (notice the -ma switch in the command outlined below). Instructions for configuring Procdump to generate dump files from crashing processes - 1. Download ProcDump utility from https://technet.microsoft.com/en-us/sysinternals/dd996900.aspx  2. Execute the following command as administrator on the endpoint (with the location of procdump local to the machine) <Path>\procdump.exe -ma -i c:\Dumps (The last parameter should be an existing local directory path. c:\dumps is just an example. ) That registers ProcDump as a "postmortem debugger".  3. Now you can work on the machine as usual.  4. Next time the crash happens ProcDump will automatically generate 1 or more DMP files in the given local folder.  (This remains in effect through reboots as well) 5. ZIP and send us the DMP files.  In process HANG scenarios registering ProcDump utility as a "Postmortem Debugger" is not necessary because a crash that triggers automatic dump doesn't happen. In a HANG scenario you should wait for the process to hang and then manually tell ProcDump to generate a full dump by calling "ProcDump -ma procname.exe". Example: "ProcDump -ma vf_agent.exe" (again notice the -ma switch).  NOTE: 'procname.exe' is replaced with the actual procedure name' If you clearly see the crash and "faulting" event in the event log but the ProcDump utility still doesn't generate DMP file then try the procedure below:  1. Create the following registry key: [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Windows Error Reporting\LocalDumps\procname.exe]  NOTE: 'procname.exe' is replaced with the actual procedure name' 2. Create the following registry values:  "DumpFolder" (type REG_EXPAND_SZ). Value: "c:\dumps" (note: must be existing local folder).  "DumpCount" (type REG_DWORD). Value: 5 (note: the maximum number of dump files in the folder).  "DumpType" (type REG_DWORD). Value: 2 (note: full dump)  This is basically the same as registering the postmortem debugger. When the procedure crashes Windows should automatically generate a memory dump. See https://msdn.microsoft.com/en-us/library/bb787181.aspx for more details.   
View full article
Question  EPM - Why when using an Advanced policy to elevate permissions are given to change system preferences such as “Printer&Scanners” does the non-admin user also has elevated permissions to “Sharing”.   Answer : Once “Printer&Scanners” is unlocked the non-admin user can go into another computer setting such as “Sharing” and make changes as non-admin. Answer: There are some shared elevated parameters that are used with the operating system, In this example “Sharing” is talking directly to printers and once “Printer&Scanners” is elevated, “sharing” is as well. This is a normal OS behavior. This is the case even when no policies are applied. Steps for example: 1. Login to the Mac as a non-admin user. 2. Navigate to System Preferences a. Click on Printer & Scanners b. Click on the security lock in the bottom left-hand corner of the window. 3. While the Printers and Scanners is unlocked, click on the system preference menu a. Click on Sharing b. Click on any of the sharing service that are on or off.  The non-Admin user has access to settings.  
View full article
Question After creating the JIT policy for the user, the user will receive the JIT policy after request settings from the EPM icon. Is it mandatory for the end user to reboot the endpoint or re-login to the endpoint for the JIT policy to be applied? Answer To understand how JIT policy works, we need to understand how Security Token works. When the JIT policy is applied, the user will be added to the Administrators Group (or other groups depending on your JIT policy configurations). At this point, the user will be able to access the applications by running as administrator, but he will be prompted UAC. He can use his own credentials in the UAC to access as Admin privileges. The reason is that Security Token is created when the user is login. Even though the user is added to the Administrators group, the Security Token is not updated until the user is re-login again. To resolve the UAC issue, proceed to re-login which creates a new Admin Security Token and then the user will be able to access the applications with Admin privileges directly.
View full article
There are many use cases where an EPM administrator would want to prevent a script or script type from accessing the internet, while still being allowed to run normally in the user environment. One such use case example is malware trying to reach the internet. Here are steps to block these scripts from accessing the internet, and also how to allow specific scripts through the block. Steps You can create a 'Run Normally' Advanced Policy for Application Type 'Run Script'.  In the Script section you can add a file name, for example, such as *.js to cover all files with the extension .js, or the specific script name you wish to keep from accessing the internet. In the Access section you can check the box next to 'Control access' and that will open up a section of more choices.  In the Internet/Intranet section you use the drop down box under Access and select 'Restrict' for the Internet.  Please be aware that if you made the policy wildcard this will affect all .js scripts (or whatever script type you chose) in the set and you definitely should test this before you implement it in your production environment.   For scripts that you need to override this policy and access the internet, you can write a policy for that specific script giving it the permissions you need, and raise the policy priority over that of the script preventing access to the internet.
View full article
Question If there is an "Elevate if Necessary" advanced policy with policy audit enabled,  which types of process launches will result in policy audit events being uploaded to the EPM SaaS server? Answer It is expected behavior that "Elevate if Necessary" policy will only send up policy audit events for processes launched as an administrator, and will not send policy audit events when they are launched normally. Example #1 Notepad.exe is covered by an advanced policy with Policy Audit enabled. End user opens notepad.exe as an administrator (right click > run as administrator). Expected result: the endpoint will generate a policy audit event. Example #2 Notepad.exe is covered by an advanced policy with Policy Audit enabled. End user opens notepad.exe normally (just by double clicking notepad). Expected result: the endpoint will not generate a policy audit event.
View full article
Question Will a policy with publisher set to any apply to unsigned apps? If there is an events management inbox event which is unsigned, if I create a policy which includes a publisher to any should I expect that the event should be removed from the inbox? Answer No No Further information: Publisher:unsigned is not the same as Publisher:any.  If you need to specify Publisher as "unsigned" you can do so using an advanced application policy.
View full article
Question How can I block an app dependent on its parent process? Answer You can use the "parent process" parameter NOTE: THIS WILL NOT WORK IF THE PARENT PROCESS HAS A POLICY WITH THE CHILD PROCESSES OPTION ENABLED In this example, we'll write a policy to block powershell.exe if the parent process is explorer.exe 1) EPM > Policies > Application Groups > Create Custom Application Group 2) Name it something like "PowerShell Parent Process Block" 3) In the scope section, click add definition 4) Add an entry for the parent process to use to determine if the policy is blocked.  Example: filename is exactly explorer.exe publisher's signature is exactly Microsoft Windows 5) Click Create to create the application group 6) EPM > Policies > Set dropdown to "Application Policies" 7) Click "Create advanced policy" in upper right 😎 Name the policy. You may want to indicate the policy will be dependent on the parent process in the name. For example, "Block PowerShell dependent on parent" 9) set the platform 10) Set Action to "Block" and click Continue 11) In scope, click "Add definition" 12) Add parameters as needed to identify the file.  For example Filename is exactly PowerShell.exe Publisher's signature is exactly Microsoft Windows Remove the "Location" field by clicking the trash can icon to the right 13) Click "Add property" and select "Parent Process" from the drop down 14) Click "Select" and then choose the name of the application group you set up earlier (in steps 1-5) 15) Click Done 16) Set targets to the appropriate computers. We recommend targeting just a small number of computers using "Computers in set" until you know the policy works well. 17) Set Priority as needed 18) Click Create > yes  
View full article
There are many use cases where an EPM administrator would want to prevent a script or script type from accessing the internet, while still being allowed to run normally in the user environment. One such use case example is malware trying to reach the internet. Here are the steps to create a policy to block these scripts from accessing the internet, and also how to allow specific scripts through the block. Steps You can create an 'Allow' Advanced Policy for Application Definition Type 'Script' that will not allow the script to access the internet by following these steps: Open the EPM Set Console for the set you are working with. Click on ‘Policies’ from the list on the left side of the screen. In the Policies dropdown list, make sure that Application policies is selected (default), then click the ‘Create advanced policy’ button in the upper right corner of the screen. This will open the ‘Create advanced application policy’ wizard. Select the correct platform. Select the Action ‘Allow’. Click the ‘Continue’ button. Name your policy. Under ‘Scope’ click the ‘Add definition’ button. Change the definition type to ‘Script’. After the Property ‘Filename’ choose ‘Contains’ from the dropdown. Put the value .js (only used as an example of the script type). Delete the other Properties by clicking on the trash can symbol next to them. Select ‘Include child processes’ under ‘Options’ if that applies. Click the ‘Done’ button. Scroll down the page to the ‘Options’ section and expand ‘Application access control’. Turn ‘Application access control’ to On. Edit ‘Online resources’. This will open the ‘Online resources’ portion of the Wizard. Click the ‘…’ button next to ‘Internet’ and select ‘Edit’. Select ‘Restrict’ and click the ‘Ok’ button. Click the ‘Done’ button. Click the ‘Create’ button. Please be aware that if you made the policy a wildcard this will affect all .js scripts (or whatever script type you chose) in the set and you should definitely test this before you implement it in your production environment. For scripts that you need to override this policy and access the internet, you can write a similar policy for that specific script giving it the permissions you need, and raise the policy priority over that of the script preventing access to the internet.  
View full article
Question If the target PC is powered down, how long will the EPM upgrade agents request be valid from the EPM console? Is it possible to set an expiration date for push upgrade requests? If a push upgrade request does not have an expiration date, in what cases will the request be aborted? Answer  If the target PC is powered down while an upgrade is pushed from the EPM console, it will have roughly a timeout period of 6 hours. Afterward, if the EPM Agent is not alive by then, it will not proceed to upgrade. There is no option for setting the expiration date for upgrade request in the console. Same as Q1, after approximately 6 hours, if the EPM Agent is not alive by then, it will not proceed to upgrade. The upgrade status will be changed to "upgrade failed".
View full article
The purpose of this is to notify EPM admins when an end user requests elevation. Steps Reports > Reports (New) > Define events report > All filters Click the "Event type" drop down and check the boxes for "User request" and "Elevation request" Change "Timeframe included" as desired. For example "Last 15 minutes" Click Done Name the report Save the report Now the report should show in the list of reports. Click the 3 dots to the right of the report, then choose "Automate" Change scheduling on "On" and set the timeframe to match what you chose earlier in step 3, (Every 15 minutes) Set an initial start time Click "Add recipient" and enter recipients as desired. Save
View full article
Question How can I login to my set on the SaaS? Answer Short answer - https://login.epm.cyberark.com/login Longer answer - On former saved login links there was an option to login directly to the server on the SaaS and bypass the dispatcher link. From v10.7 using a saved link can result in the following message "You cannot connected directly with the EPM server. You must connect using the dispatcher." Please use the link provided on 'Short answer' Q. How can I login to my set on the SaaS?   A. Short answer - https://login.epm.cyberark.com/login    Longer answer - On former saved login links there was an option to login directly to the server on the SaaS and bypass the dispatcher link. From v10.7 using a saved link can result in the following message "You cannot connected directly with the EPM server. You must connect using the dispatcher." Please use the link provided on 'Short answer'
View full article
Question Q: Where are EPM audit videos stored when End-user Computer is used as Movie Location? A: They are stored here: C:\Windows\System32\config\systemprofile\AppData\Local\Viewfinity\Agent\Video Audit   Q: Where are EPM audit videos stored when End-user Computer is used as Movie Location? A: They are stored here: C:\Windows\System32\config\systemprofile\AppData\Local\Viewfinity\Agent\Video Audit
View full article
Question Can I use multiple tabs in the same web browser in the EPM Console to view different EPM sets side-by-side? Answer We recommend you only use the EPM console in one web browser tab.  We advise against trying to open multiple tabs for different EPM sets.  If you open EPM in multiple tabs in the same browser, you can expect to experience unwanted behavior, such as seeing inaccurate information, or accidentally modifying a policy or setting in the wrong set.  
View full article
Question An alert was received by security monitoring systems on the following LDAP query being issued.  Does the DNA Tool do this? (&(&(&(sAMAccountType=805306368) (servicePrincipalName=*) ( ! (sAMAccountName=krbtgt))))) Answer Yes.  The DNA Tool issues this query during the ScanDomainServices segment of the scanning process.  This is expected behavior while performing discovery with DNA Tool.
View full article
Question If I remove disconnected endpoint manually from My Computers, will it be automatically shown when it is connected again? Answer Yes, it will be shown automatically. 1. I disabled network connection on the endpoint computer and confirmed that Agent Connectivity Status turned to 'Disconnected'. 2. Removed endpoint from My Computers maually. 3. Enabled network connection on the endpoint computer. 4. Endpoint computer appeared again on the list of My Computers with Alive status.  
View full article
Question Question about following parameters:   1) Minimum Length - I changed this parameter longer than the default, but I can log in with an existing password that is shorter than the newly changed Minimum Length. Is this change will be applied to the newly changed password? 2) Timeout for an inactive session(minutes) - What is the range of values? Answer 1) Yes, this change will also be applied to the newly changed password. 2) The Timeout for an inactive session is 10 - 360 (min.) 
View full article
Purpose: Explanation of the EPM Report Dashboard Widget named "Local Administrator End Users" How to Enable Dashboard Widget: EPM > (Set) > Reports > General Dashboard > Click to add summary report > Click here to add Summary Report > Local Administrator End Users Steps Explanation: The pie diagram categorize computers in 3 categories: (red) Extra local administrators (orange) Extra domain administrators (green) No Extra local administrators (red) computers: - Computers where any local account, or domain user account (except built-in "Administrator" account) is added to local "Administrators" user group on the endpoint. (orange) computers: - Computers where ONLY domain groups are added to the local administrators group on the PC.   - If individual domain users or local users are added, the computer won't fit into this category.  They computers will instead fall under the Extra local administrators category. - The group can be actually empty with no members in the AD group. - The built in "Domain admins" or "Enterprise Admins" groups do not count. (green)  computers: - The computer has no local users, domain users, or domain groups added to local "Administrators" group. - The Built in local account named "Administrator" or the built in "Domain Admins" or "Enterprise Admins" groups do not count.
View full article
Question UPDATE: The issue has been fixed and should work normally now. We are leaving this article in place for now as an alternate means of getting MSI. We found that following release 21.9 the browser plugin does not download.  You will receive an error such as the following:   Answer UPDATE: The issue has been fixed and should work normally now. We are leaving this article in place for now as an alternate means of getting MSI. We are aware of the issue and the team is working to address it. We will update this article once new information is available. Please find attached the installer MSI for the browser plugin.
View full article
What are the next steps in Suspend Policies or unloading driver (vfdrv) resolves the issue? Issue What are the next steps in Suspend Policies or unloading driver (vfdrv) resolves the issue? Resolution Suspend Policies If this is the case we will need to find the policy that is causing this issue. You can start by looking at the Support Info when policies were NOT suspended and see if there are any policies that are constantly being triggered or if it is related to a certain application if there are any policies being triggered with this application. Other wise it is basically a trial and error process for the client, the best way to find the policy causing this would be: 1. Create a test set 2. Export all the policies from PROD set (right click on any policy > Export > Export All) 3. Import the policies into the test set 4. Deploy the agent from the test set to a test machine 5. Reproduce the issue to make sure it is still happening 6. Deactivate half the policies and retest a. If the issue is resolved then the policy is within the list that you deactivated, you can do the same activate/deactivate method within that list of policies until you find the culprit b. If the issue is not resolved then deactivate half the policies again and so on Unloading the driver (vfdrv) Gather a ProcMon and Support Info* for: 1. Driver loaded and client can reproduce the issue 2. Driver unloaded and issue is resolved *Follow article 4670 for steps on ProcMon/Support Info Steps ​​​​​Suspend Policies If this is the case we will need to find the policy that is causing this issue. You can start by looking at the Support Info when policies were NOT suspended and see if there are any policies that are constantly being triggered or if it is related to a certain application if there are any policies being triggered with this application. Other wise it is basically a trial and error process for the client, the best way to find the policy causing this would be: 1. Create a test set 2. Export all the policies from PROD set (right click on any policy > Export > Export All) 3. Import the policies into the test set 4. Deploy the agent from the test set to a test machine 5. Reproduce the issue to make sure it is still happening 6. Deactivate half the policies and retest a. If the issue is resolved then the policy is within the list that you deactivated, you can do the same activate/deactivate method within that list of policies until you find the culprit b. If the issue is not resolved then deactivate half the policies again and so on Unloading the driver (vfdrv) Gather a ProcMon and Support Info* for: 1. Driver loaded and client can reproduce the issue 2. Driver unloaded and issue is resolved *Follow article 4670 for steps on ProcMon/Support Info
View full article
  • 234 Posts
  • 19 Subscriptions
Top Liked Posts in LIVEcommunity Article
Top Liked Authors