ASA port-channel migrated to AE but how can i remap physical interfaces to it

Showing results for 
Show  only  | Search instead for 
Did you mean: 

ASA port-channel migrated to AE but how can i remap physical interfaces to it

L1 Bithead

 I have similar issue, we are migrating from ASA to Palo Alto 3260. on ASA we have aggregated interface configured for LAN and WAN now while migrating this config in expedition i can remap name of port-channel to AE. but how can i change the ports belongs to AE. on ASA Te 1/1 and Te 1/2 belongs to port-channel 1, now on expedition i can remap name from Port-channel 1 to Ae1, but how can i map interfaces to that Ae.#Expedition


L6 Presenter

You will need to assign the interface to AE group as shown in the screenshot:

Screen Shot 2022-08-02 at 12.02.02 PM.png

Thanks for the response! But the SS is from firewall but how can we map interfaces to the AE on expedition. In our scenerio, we have asa with port-channel e.g., PO1 having interfaces Eth1 and Eth2 , but when we migrating this config in expedition only port-channel is migrating to AE, but physical interfaces remapping option is not coming. so how can we assign physical interfaces to Aggregate in expedition.

L1 Bithead

Hi Folks, did anyone came across is such scenerio or any suggestions on this ? my migration from ASA to Palo-Alto stuck at this step, any suggestion is appreciated.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!