Not able to see all ASA firewall interfaces on Expedition tool

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Not able to see all ASA firewall interfaces on Expedition tool

L2 Linker

We are planning to migrate Cisco ASA firewalls to Palo Alto, as part of it we are converting the configurations using Expedition tool, but while i check on Network section for the firewall interface, i can see only port channel interfaces but not seeing the physical interfaces are part of that port-channel group. Do i need to manually create physical interfaces and add them as part of aggregate interfaces?

 

1 accepted solution

Accepted Solutions

L6 Presenter

Hi @Bkrishnamoorthy  You can remap port-channel to aggregate ethernet interface , for example, click port-channel interface -> click "remap interface name " , scroll to the bottom of the dropdown to select "ae1" , that way it will map the port-channel to ae1 :

 

Screenshot 2023-04-17 at 9.02.24 AM.png

 

then you add the new ethernet interface , for example "ethernet1/1", change the type to Aggregate Ethernet , and select group "ae1" , this will assign ethernet interface to the Aggregate Ethernet Group "ae1"

Screenshot 2023-04-17 at 9.01.13 AM.png

 

 

View solution in original post

2 REPLIES 2

L6 Presenter

Hi @Bkrishnamoorthy  You can remap port-channel to aggregate ethernet interface , for example, click port-channel interface -> click "remap interface name " , scroll to the bottom of the dropdown to select "ae1" , that way it will map the port-channel to ae1 :

 

Screenshot 2023-04-17 at 9.02.24 AM.png

 

then you add the new ethernet interface , for example "ethernet1/1", change the type to Aggregate Ethernet , and select group "ae1" , this will assign ethernet interface to the Aggregate Ethernet Group "ae1"

Screenshot 2023-04-17 at 9.01.13 AM.png

 

 

@lychiang It helped to discovered the interfaces as required , thanks for your solution.

  • 1 accepted solution
  • 1688 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!