06-09-2020 02:50 PM
Hi @ZHOUJO5 , For migration from M500 to M600, you should be able to export the config from M500 and Load it back to M600. To further validate Expedition issue, do you mind email your M500 running config to fwmigrate@paloaltonetworks.com
Thank you!
06-10-2020 11:13 AM
The reason we need to use expedition, as M500 over configuration size, (80M system offered), we have 53M blank space that palo alto confirmed we cannot reuse, that's the reason we use expedition to clean up and consolidate the fw configurations.
You may reference palo alto case 01373635, we have configuration file in it.
The issue I reported already showed in the capture screen that clarified the issue.
06-10-2020 01:24 PM
@ZHOUJO5 Expedition team does not have access to the TAC case , so please send your config to fwmigrate@paloaltonetworks.com if you think this is Expedition issue.
Thank!
06-18-2020 03:18 AM
The output you have in the CLI does not seem to be consistent with what you have shown in the GUI.
The CLI only shows the "any".
Additionally, does it make sense to have an "any" zone as well as a specific zone?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
