Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Getting Expedition setup?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Getting Expedition setup?

L0 Member

I am trying to get the Project Statistics setup but I cannot find it on the latest version of Expedition 1.1.89. I am new to Palo Alto. I watched the videos on youtube but they seem to be for a much earlier version of expedition. We are using this to find invalid rules and objects.

How does expedition get its information from the PA firewalls? I was told that the FW points its logs to Expedition so where in PAN-OS do I see that?

How can I tell that Expedition is getting and processing the logs?

I have created a test project

Create project -> Settings -> Devices -> Devices with downloaded configurations – I see all the firewalls from Panorama

Devices -> Monitor – I see all PAN-OS firewalls

Dashboard -> Project Statistics – I cannot find this…

Any insight is appreciated.

Thank you,

J

1 accepted solution

Accepted Solutions

L6 Presenter

Hi @jjevans 

1. Click on the setting of the project and go to "Devices", make sure you have the device assigned to the project like the below screenshot:

 

 

Screen Shot 2020-12-31 at 9.39.12 AM.png

2. Double click to go to the project, go to "Import "-> "Palo Alto Networks", then you should see the devices you assigned to the project, then double click on the device to import the configuration. 

 

After you import the configuration, you can then go to the Dashboard to view statistics.

 

Regards,

Lynn

You need to go to import tab and click on the device to import the pan-os configuration. 

View solution in original post

2 REPLIES 2

L6 Presenter

Hi @jjevans 

1. Click on the setting of the project and go to "Devices", make sure you have the device assigned to the project like the below screenshot:

 

 

Screen Shot 2020-12-31 at 9.39.12 AM.png

2. Double click to go to the project, go to "Import "-> "Palo Alto Networks", then you should see the devices you assigned to the project, then double click on the device to import the configuration. 

 

After you import the configuration, you can then go to the Dashboard to view statistics.

 

Regards,

Lynn

You need to go to import tab and click on the device to import the pan-os configuration. 

Thank you Lynn I really appreciate your insight. I hope you have a great new years.

  • 1 accepted solution
  • 2988 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!