01-31-2019 01:14 PM
On page 11 of the User Guide, it says this:
"To convert to the proper naming convention, we can select the Ethernet1/1 who is parent for more sub-interfaces (vlan tags) and click on the Remap Interface Name located at the bottom left-side bar"
When I select an interface then click on the "Remap Interface Name" I do not get a pop-up box like the User Guide states. I am unable to remap interfaces. Could I skip this section, then do a find/replace within a specific text file? If not, how do I resolve.
01-31-2019 03:24 PM
if you look in the lower right hand corner you will be prompted to choose a template and vsys before the pop box is initaited.
Can you verify if those options have been selected prior to clicking on the remap interfaces.
lets go Pats BTW!
01-31-2019 03:24 PM
if you look in the lower right hand corner you will be prompted to choose a template and vsys before the pop box is initaited.
Can you verify if those options have been selected prior to clicking on the remap interfaces.
lets go Pats BTW!
02-01-2019 04:50 AM
Hello sjanita,
You are correct! Thank you. Maybe an update to the User Guide to point this out would be good.
GO PATS!
04-08-2019 07:16 AM
Hello sjanita,
Do you know which vsys option is best? I only had one template option called default_template1 so I picked that. Regarding vsys, there are two options: shared and root. We are not using multiple virtual systems in our environment.
How about those PATS!
Thank you,
Brian
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
