I downlaoded the OVA file but when I import on WS 15 pro I got the following error
"Size mismatch during data transfer; expect 2652706958 bytes to read but 3192189440 bytes are pending to read. Source file may be corrupted.
if the OVA is not installin g on workstation you can download and install the VMDK files by clicking on the link for:
"Get the Tool VM"
Logging into the WebUI is described in the User Guide:
from the CLI find the IP address assigned to the Expedition server:
open a browser session - https session to the IP address listed.
https://<ip assigned to your Expedition server>
ens33 Link encap:Ethernet HWaddr 00:0c:29:85:1a:47
inet addr:192.168.252.136 Bcast:192.168.252.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe85:1a47/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:254037 errors:0 dropped:0 overruns:0 frame:0
TX packets:161590 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:183128773 (183.1 MB) TX bytes:86094261 (86.0 MB)
Check your VM (in VMWare , not in the Expedition image itself) to verify the networking that you have offered to the virtual machine.
Either you have connected the VM to an interface that does not offer DHCP or it is not connected to a valid network interface at all.
You may want to give Expedition access to your network, so we would recommend that you connect the network interface that the VM will use to a network sharing internet using NAT.
It comes with a default set of settings that work fine with most cases.
If you require extra space for logs (in case you are going to do traffic log analytics) you may want to add another drive (preferably a SSD) and some extra RAM and CPUs if possible.
If you are going to import large files, check for the modification of the php.ini file (you can find this info in the forum).
Also, you can check and modify the Max time and Max RAM used for Parser processing via the Web UI in the Settings->Custom Parameters section.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!