Expedition 1.2.48 Hotfix Information

Showing results for 
Show  only  | Search instead for 
Did you mean: 
L4 Transporter
Did you find this article helpful? Yes No
No ratings

Version 1.2.48 (Date Dec 23, 2022)







apt update
sudo apt-get update; sudo apt-get install expedition-beta
manual update cd /tmp;
wget  https://conversionupdates.paloaltonetworks.com/expedition-updates/expedition_1.2.48.all.deb;
sudo dpkg -i expedition_1.2.48.all.deb;



New feature / Bugs

  • [MT-2513] - APP-ID Adoptions on v10.2.x and v11.0.x stuck at generating report. Using GET API method instead of PUT.
  • [MT-2523] - Avoid showing twice 'shared' vsys on the dropdown menu
  • [MT-2526] - Expedition is not removing the Panorama devices once they are imported, even if they are removed from Panorama
  • [MT-2528] - Merge by name (on address group) is not working as expected
  • [MT-2516] - CISCO ASA - DNAT Sec Rule was not created due to service mismatch between the sec and NAT rule.
  • [MT-2525] - Juniper SRX - Tunnel interface is not updated in the zones
  • [MT-2527] - Juniper SRX - Cloning NAT policy when it has more than one TO destination zone
  • [MT-2530] - CHECKPOINT R80+. Interfaces and static routes creation change.
    • Interfaces and their addresses are created from the gateway definition (inside the .gz file).
    • Statics routes are created from the provided route file (optional file).
Rate this article:
Register or Sign-in
Article Dashboard
Version history
Last update:
‎12-23-2022 08:22 AM
Updated by: