- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
12-29-2015 02:47 PM
Hi Team,
Can anyone confirm that 3060 model can support PANOS 6.0.9 ?
12-31-2015 05:14 AM
Hi Johnshaik,
Now we have an official doc which mentions that PA-3060 is only supported on 6.1.0 and later :
Hope this helps !
12-29-2015 03:12 PM
Hello,
Yes that OS is supported. PAN runs only one code for all platforms so you should be all set. You can verify by going to the Device tab-> Software -> Check Now, the supported versions will show up including the newest available for your platform.
Regards,
12-29-2015 10:20 PM
But I can see the softwares till 6.1.0 @ Devices ->Softwares.
12-29-2015 11:45 PM
Hi Guys
The PA-3060 platform was introduced in PAN-OS 6.1 with the new 10G SFP+ ports. Due to this new hardware the PA-3060 is not supported in 6.0
hope this helps
Tom
12-29-2015 11:52 PM
Hi,
Can we have any document which mentioned this?
12-30-2015 01:42 AM
Hi Johnshaik,
PA-3060 does not support versions lower than 6.1.0.
PA-3060 was introduced with 6.1.0 and it is not recomm to attempt loading any lower versions hence a check has been added to the software upgrade logic in 6.1.0 to prevent any software older than 6.1.0 from being installed or even loaded on PA-3060.
I do not see any public doc sharing this info but has been confirmed by internal teams.
Regards,
Sandeep.
12-30-2015 02:05 AM
This is the page containing info around the announcement on 6.1 and PA-3060:
12-31-2015 05:14 AM
Hi Johnshaik,
Now we have an official doc which mentions that PA-3060 is only supported on 6.1.0 and later :
Hope this helps !
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!