About Link Aggregation

cancel
Showing results for 
Search instead for 
Did you mean: 

About Link Aggregation

L3 Networker

Hello guys.

I tested about link aggregation for PA4060 that connected CISCO SW. but PA only connected "channel-group mode on" that mean disabled PAgP en LACP only with Cisco SW.

I think PA should connected other devices using LACP (802.3ad) but result was not.

So I want to know that configuration of guideline for link aggregation of PA.

Thanks.

Regards.

Roh.

1 ACCEPTED SOLUTION

Accepted Solutions

L4 Transporter

ttongfly wrote:

Hello guys.

I tested about link aggregation for PA4060 that connected CISCO SW. but PA only connected "channel-group mode on" that mean disabled PAgP en LACP only with Cisco SW.

I think PA should connected other devices using LACP (802.3ad) but result was not.

So I want to know that configuration of guideline for link aggregation of PA.

Thanks.

Regards.

Roh.

Try using the "channel group X mode active" command on your Cisco device.

I've found Cisco devices work best with other vendor devices when *both* sets of devices are in active mode (I.E. no passive LACP ports).

Cheers

View solution in original post

4 REPLIES 4

L3 Networker

The PAN will not support additional protocols PAgP,

I have confirmed we support the standard for link aggregation (802.3ad), this should work.

L4 Transporter

ttongfly wrote:

Hello guys.

I tested about link aggregation for PA4060 that connected CISCO SW. but PA only connected "channel-group mode on" that mean disabled PAgP en LACP only with Cisco SW.

I think PA should connected other devices using LACP (802.3ad) but result was not.

So I want to know that configuration of guideline for link aggregation of PA.

Thanks.

Regards.

Roh.

Try using the "channel group X mode active" command on your Cisco device.

I've found Cisco devices work best with other vendor devices when *both* sets of devices are in active mode (I.E. no passive LACP ports).

Cheers

View solution in original post

Hi guys

Thanks you! I will test again soon!

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!