- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
11-13-2021 09:42 AM
Hello, I have a PA-220 with PANOS 10.1.3 installed. I see IPv6 addresses in source/destination IP widget. It started from 10.1.x version
does anybody has the same issue?
03-08-2022 10:27 AM - edited 03-08-2022 10:43 AM
Engineering maintain that it is fixed in 10.2. I will ask if it is still going through QA cycles, I am seeing similar behavior in my lab as well
EDIT: Engineering maintain that the fix is 10.1.5, they've at least documented the root cause now (so I'm more inclined to believe them now). They also maintain that it will be fixed in the official 10.2 release, but not in the beta program. This JIRA (PAN-163831) updated 10 hours ago.
03-08-2022 11:52 AM
The same problem on pa-220 with software 10.1.4-h4, what is the solution?
Thx
03-22-2022 10:23 AM
My understanding was that 10.2 wasn't officially GA until tomorrow, and that we technically were still in beta testing.
In either case, JIRA still documents this issue fixed in 10.1.5 and 10.2.0, updated yesterday. It's marked as closed. If this persists, best to have eTAC (aka engineering TAC) re-open that issue if you add it to your case notes.
03-22-2022 12:09 PM
I´waiting a 10.1.5 to pa220.... i need to resolve this problem with ipv6
03-23-2022 02:32 PM
Good news, all. The fix has cleared QA per eTAC today. 10.1.5 and 10.2.0 are still marked as solutions internally. ETA for this maintenance release is this week.
03-25-2022 03:26 AM
Goog News
I´m solved with panos 10.1.5 to pa220, the problem with ipv6 (only view ips in acc and monitor in ipv6)
Thx
03-25-2022 03:28 AM
Looks good, version 10.1.5 seems to fix the issue.
03-25-2022 09:49 AM
Thankfully. Appreciate the patience, but glad I finally had accurate good news for y'all.
03-27-2022 02:24 AM
still the same with 10.1.5 really upset
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!