06-02-2017 08:49 AM
I added a single host to an existing tunnel. Does the phase 1 portion of the tunnel need to be restarted to take effect? After I added the new proxy-id 39 - if I run show vpn flow - I see that portion of the tunnel is in "init" phase while all others are active.
I tried tunning "test vpn ipsec-sa .." for that specific phase 2 instance but it's still just in init. Thanks.
277 IPSEC-YoyoPhx-Yaba-TUNNEL:YoYab-39init off 13.17.36.54 7.13.102.52 tunnel.22
06-02-2017 08:54 AM
Did you add new ProxyID to both sides of the tunnel?
06-02-2017 12:48 PM
I'm dealing with outside vendors for these tunnels. They said they added to their side of the tunnel but I can't actually see. Is there any way on the PAN to see if a pair of phase 2 addresses is trying to negotiate? e.g. say on the PAN side Proxy-ID-10 is Local 10.10.5.5/32 and Remote 192.168.5.5. Proxy-IDs 1 through 9 are fine and state active but 10 is init. Is there any way to see the of 192.168.5.5/10.10.5.5 are trying to become part of the phase 2?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
