Aggregated interfaces on PA 5250

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Aggregated interfaces on PA 5250

L2 Linker

Hi there,

 

We are implementing aggregated interfaces on PA 5250. I have configured 10 aggregated subinterfaces from two physical interfaces. when I enabled the LACP on the aggregated interface group, the maximum interfaces is set to 8 by default. I believe this is number of physical interfaces that are active at any given time right? if that is it, in my case do I have to set that value to 1 cause I only aggregated two physical interfaces? 

 

Please let me know your thoughts.

 

Best regards,

Nagarjuna  

3 REPLIES 3

L4 Transporter

LACP only applies to the physical interfaces.

Most devices support "only" 8 physical interfaces, bonded as on link aggregation group

Best Regards
Chacko

Hi,

Thank you for the response. Right, but we can change that value though from 8. So, in my case I should set that to only 1 right?

Ah, okay - that is only an index to differentiate different aggregated groups.

You already create ae8 - so this value cannot be changed, you would need to delete the ae and add it again with index 1.

 

So that's no problem, it's just an index number like tunnel.1, tunnel.3 etc.

Best Regards
Chacko
  • 3188 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!