Any one work with RiverBed and PA intergration

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Any one work with RiverBed and PA intergration

L4 Transporter

I only see 1 posting regarding Ribverbed intergration and Palo Alto. Wanted to see if anyone else has had issues and what expereinces they may hav encountered. We are  currently running active/pasive on the PA when we bypass the RB all is fine with RB on stops working. We have easy setup with RB between PA and Core router.

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

What mode are you running in? Full transparency with Reset is known to cause time-out issues which would explain why you are seeing issues. 

View solution in original post

4 REPLIES 4

Cyber Elite
Cyber Elite

What mode are you running in? Full transparency with Reset is known to cause time-out issues which would explain why you are seeing issues. 

L4 Transporter

Thanks for reply. Im  having  RB checked right now to confirm now.  Just wasnt sure in the meantime other than mode setting was there any other issues seen if that the mode wasnt a issue

L0 Member

Hi,

Can you please share the document of integration Riverbed with Paloalto

Ashish

L2 Linker

Posted in this thread too

https://live.paloaltonetworks.com/t5/general-topics/does-anyone-have-any-experiences-or-quot-gotchas...

 

Hi,

Currently have issues with RB Steelheads behind palos

lan-rb-palo-ipsec-srx-rb-lan works fine

 

migrated out the srx with palo recently

lan-rb-palo-ipsec-palo-rb-lan not working for optimization

 

Tried any:any on both side

Tried app override for ports 7800-7850 riverbed peering

 

Just see resets in the packet captures.   

 

PanOS running 10.2.7-h3

Riverbed RIOS 9.14.2

 

Appreciate any thoughts on what to try next

 

  • 1 accepted solution
  • 2809 Views
  • 4 replies
  • 1 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!