03-06-2013 12:32 PM
Hi all,
Just wanna know if there is an issue to disable split tunneling for my vpn clients. I want that ALL the traffic goes through the vpn tunnel, and nowhere else.
Regards,
Karl
03-06-2013 12:52 PM
Configure 0.0.0.0/0 access route within your Gateway client config network settings. If you have the tunnel configured on a different zone than your trust zone (gp zone), make sure you have a source nat rule that allows gp zone to external. Otherwise, they won't get out.
03-06-2013 12:52 PM
Configure 0.0.0.0/0 access route within your Gateway client config network settings. If you have the tunnel configured on a different zone than your trust zone (gp zone), make sure you have a source nat rule that allows gp zone to external. Otherwise, they won't get out.
03-06-2013 03:24 PM
If you just leave the IP space area blank it'll work too... adding 0.0.0.0/0 explicitly makes it more obvious that a full tunnel is configured
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
