Application Command Center empty and risk factor set to zero

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Application Command Center empty and risk factor set to zero

L1 Bithead

Suddenly the Application Command Center  became empty showing " no data to display" and risk factor set to zero.

after debug software restart log-receiver on the cli the logs started to repeear but only for a few minutes then disappeared again.

Any suggestions?

5 REPLIES 5

Cyber Elite
Cyber Elite

is your system running a recent PAN-OS ? If not, i'd try and upgrade to see if that solves the issue

 

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

7.1.8

Cyber Elite
Cyber Elite

It sounds like a process is likely stuck. Anything on show system resources that would indicate a stuck process? It might be worth simply restarting the management server and see if that doesn't clear things up. 

show system resources shows nothing abnormal. Restarted the management server, but no difference unfortunately

**bleep**'s working now, turned out to be time zone issue due to applying summer time.

Thank you all for caring.

  • 3188 Views
  • 5 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!