Application Command Center empty and risk factor set to zero

Announcements

Changes to the LIVEcommunity experience are coming soon... Here's what you need to know.

Reply
Mohamed_Tarek
L1 Bithead

Application Command Center empty and risk factor set to zero

Suddenly the Application Command Center  became empty showing " no data to display" and risk factor set to zero.

after debug software restart log-receiver on the cli the logs started to repeear but only for a few minutes then disappeared again.

Any suggestions?

reaper
L7 Applicator

is your system running a recent PAN-OS ? If not, i'd try and upgrade to see if that solves the issue

 

Tom Piens - PANgurus.com
Like my answer? check out my book! amazon.com/dp/1789956374
Mohamed_Tarek
L1 Bithead

7.1.8

BPry
Cyber Elite

It sounds like a process is likely stuck. Anything on show system resources that would indicate a stuck process? It might be worth simply restarting the management server and see if that doesn't clear things up. 

Mohamed_Tarek
L1 Bithead

show system resources shows nothing abnormal. Restarted the management server, but no difference unfortunately

Mohamed_Tarek
L1 Bithead

**bleep**'s working now, turned out to be time zone issue due to applying summer time.

Thank you all for caring.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!